Advertisement
5. OPERATION
5.1.
Arrange the position of the support arms to suit the object being dealt with by loosening the Support arm hand wheel. Fully retighten
once in position.
Select the relevant saddles (fig.2), slide over Tool posts and adjust heights to suit the load using the tool post Hand wheel.
5.2.
5.3.
When mounted, carefully lower the load to the lowest possible height when being moved to ensure good balance.
WARNING! Ensure that the loaded item is correctly supported, well balanced and secured in place prior to final removal from vehicle
‰
and any movement of the loaded jack within the workshop.
fig.2
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
SFC01
Issue 1
12/01/22
Advertisement
