Charge The Battery - Verykool S5524 User Manual

Remove Memory Card and SIM Card
Note: If the phone is turned on, long press Power Key about 3
seconds until it tips phone options and select Power off and
then press OK to turn off the phone. Then, remove the battery,
SIM card and memory card.
Do not plug or remove memory card in boot state, otherwise it
will cause damage to the file system.

Charge the Battery

Before charging, check the battery slot to ensure the battery
1.
has been installed correctly.
Plug one end of the charger into phone.
2.
Connect another end of the charger to the socket.
3.
Start charging. It can be charged whether power on or power
4.
off.
▪
In power on state, when the battery icon on screen start rolling
means it is been charged. When the icon is full and stop rolling
means charge is completed.
▪
In power off state, the battery icon on screen start rolling
means it is been charged. When the icon is full and stop rolling
means charge is completed.
Unplug the charger from the socket.
5.
Disconnect the charger and phone.
6.
8