Troubleshooting
Status
Battery life is short
You cannot take a
picture
Memory card not
recognized or camera
freezes with card
Cannot find the
desired picture/video
Computer/connectivity problems
Status
Pictures do not
transfer to computer
Slide Show does not
run on an external
video device
Computer does not
communicate with
the camera
42
Solution
■
Make sure the correct battery type is installed
■
Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■
Insert a new or charged battery
■
Turn the camera off, then on again.
■
Depress the Shutter button all the way
■
Insert a new or charged battery
■
Memory is full. Transfer pictures to the computer
delete pictures
■
Card may be corrupted. Format the card in the camera
page
32).
■
Use another memory card. Only SD or SDHC Cards are supported.
■
To view pictures on a card or in internal memory,
Solution
■
See Help in EASYSHARE Software.
■
Adjust the camera Video Out setting to NTSC or PAL
page
31).
■
Make sure the external device settings are correct. (See the
device's user's guide).
■
Make sure the battery is charged and installed correctly
page
1).
■
Turn on the camera.
■
Make sure the USB cable model U-8 is connected to the camera
and the computer
■
Make sure EASYSHARE Software is installed
(see page
(see page
(see page
15), or insert another card.
(see page
34).
www.kodak.com/go/support
(see page
52).
1).
(see page
5).
1).
(see page
(see
see page
(see
(see
(see page
33).
33),
14.