Page 1
Assembly Instruction Manual MODEL NO.: PINTO BC1200 - Please follow these assembly instructions as it will save you time, make assembly easier and prevent possible damage to your new unit. - Correct assembly is your responsibility. - We strongly recommend that the unit is assembled on a soft surface such as carpet or blanket.
Page 4
arrowhead on cam points toward to the hole on the panel edge.
Page 5
arrowhead on cam points toward to the hole on the panel edge.
Page 7
arrowhead on cam points toward to the hole on the panel edge.
Page 9
Use a screw driver to fasten the screws (Part 17) into the wall.
SURFACE CARE INSTRUCTIONS A little care and attention will extend the life and good looks of your furniture. Take care when using materials which might spill, or be sharp or abrasive, on the surface of your furniture. Normal Cleaning: For normal cleaning use a soft, dry, clean cloth. Glass Cleaning for Frosted Glass: Do not use glass cleaner or solvent based cleaners on the surface of the glass that has the frosting effect on it.
WARRANTY POLICY 1. Nothing in this Warranty affects the Consumer’s rights under the Australian Consumer law. The benefits to the Consumer under this Warranty are in addition to the rights and remedies of the buyer under any Consumer Guarantees. The Australian Consumer Law requires that we confirm that: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
Page 12
b.) Make note of the defects reported by the Owner. c.) Take back the defective goods from the owner and determine within a reasonable time through dialogue with the Seller whether the goods are defective. d.) Advise the owner within a reasonable time frame whether it accepts or rejects the Product claim.
Need help?
Do you have a question about the PINTO BC1200 and is the answer not in the manual?
Questions and answers