Starching; Dyeing/Bleaching; Soaking; Programme Default - Siemens WM10K160HK Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Programme/type of laundry/information
0 Spin/Drain p
Extra spin with speed that can be selected
If only the drain cycle is required, set the spin speed to – – –.

Starching

Laundry must not be treated with
Note:
fabric softener.
Starching is possible in all wash
programmes if liquid starch is used.
Starching with liquid starch is possible
in programs such as Rinse and Cottons

Dyeing/bleaching

Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.
Do not use the washing machine to
bleach clothes.

Soaking

Pour soaking agent/detergent into
1.
compartment II in accordance with
the manufacturer's instructions.
Select desired programme.
2.
Press Start/Reload ! .
3.
After approx. ten minutes, press
4.
Start/Reload ! .
After the required soaking time,
5.
press Start/Reload ! again to
continue or change the programme.
Notes
Load laundry of the same colour.
No additional detergent is required;
the soaking solution is used for
washing.
Programme default settings
Settings/Presettings of the pro-
grammes are highlighted in bold
-
-
– – – ... 800 ... 1200** rpm
-
0

Programme default

settings

The spin speed and programme
P r o g r a m m e d e f a u l t s e t t i n g s
duration ("Ready in" time) for all
programmes are preset at the factory.
These are displayed in the display panel
after selecting the programme.
You can change the default settings as
follows.

(Spin speed) 0

(Spin speed)
Depending on the programme
progress, you can change the spin
speed (in rpm; rotations per minute)
before and during the programme.
To do this, repeatedly select the
corresponding button until the required
setting is displayed.
Setting – – – 0 : Rinse hold = without
final spin, the laundry remains in the
water after the final rinse.
You can select "Rinse hold" to prevent
creasing if the laundry will not be taken
out of the washing machine immediately
after the programme has ended.
The maximum speed that can be set
depends on the model and programme
that have been selected.
Overview of programmes ~ Page 13
en
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wm12k160hk

Table of Contents