2. Clean the thermal grease from the bottom of the heat sink and reapply it.
3. Align the seven captive screws on the heat sink with the screw holes on the system board and tighten the screws in sequential order (indicated on the
heat sink).
4. Follow the instructions from
5. Replace the display assembly (see
6. Replace the keyboard (see
7. Replace the palm-rest assembly (see
8. Replace the memory module(s) (see
9. Replace the module cover (see
10. Replace the battery (see
CAUTION:
result in damage to the computer.
Back to Contents Page
Great user manuals database on
Before You
Begin.
step 9
to
step 12
in
Replacing the Top
Replacing the Display
Replacing the
Keyboard).
Replacing the Palm-Rest
Replacing the Memory
Replacing the Module
Replacing the
Battery).
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may