Bissell SPOTCLEAN 2513 Series Manual page 7

Using the Tools
(continued)
Stain Trapper Tool
1.
Point the tool approximately
1 inch above the spot or stain
and press the spray trigger.
4.
Pour dirty liquid into sink or
toilet and rinse. Allow time to
air dry.
HydroRinse™ Tool
1.
Hold the hose and tool in
an upright position with the
machine ON. Hold down the
trigger for 30 seconds. Be sure
to empty the Dirty Water Tank
after use (see page 8).
2.
Suction up the stain by
placing tool onto carpet and
slowly moving backwards.
5.
Return the tank to the tool
by lining up the grooves and
twisting it into place.
2.
You can store tool on
machine, as shown.
3.
To empty the tool tank,
rotate clockwise.
BISSELL.ca 7