APR TB-10010 User Manual

USER GUIDE TB-10010
Scorpion Auto-Focus Camera
Installation and Operation Instructions
Figure 1. APR 670029
Description
The APR 670029 Scorpion Auto-Focus Camera pairs
with the Scorpion Rework System to provide solder
reflow visibility and rework inspection. The auto-focus
camera features 1080p resolution and 60 fps image
quality for sharp imagery with minimal lens configuration
and no motion blur. The quick knob on the included
articulating arm easily locks the camera's orientation,
so it can transition between side-view and overhead
positions for multi-purpose use. Embedded software
saves and recalls images and videos onto an SD
card for quality control documentation. The Scorpion
Auto-Focus Camera includes the camera, macro zoom
lens, LCD monitor, LED ring light, articulating arms, and
wireless mouse.
Packaging
1 Auto-Focus Camera
1 Macro Zoom Lens
1 LCD Monitor, 12"
1 LED Light Ring with North American Power Cord
1 Camera Articulating Arm
1 Monitor Articulating Arm
1 Wireless Mouse
1 SD Memory Card, 16 GB
1 HDMI Cable, 5'
2 Power Adapter, 12 VDC, with interchangeable plugs
(North America, UK/Asia, Europe)
1 Mounting Block with Knob and Washer
2 Flat Head Screw, M6 x 16 mm
TB-10010 Page 1 of 5 April 2020
Scorpion Auto-Focus Camera
APR - 3651 Walnut Avenue, Chino, CA 91710 • (909) 664-9980 • Website:
Figure 2. LED Ring Light, Auto-Focus Camera with
Macro Lens, LCD Monitor, Camera Articulating Arm,
Monitor Articulating Arm, and Wireless Mouse
Installation
1. Use a 4 mm hex key and the two included flat head
screws to secure the mounting block to the left
gantry arm on the Scorpion Rework System.
Figure 3. Using the two flat head screws to secure the
mouning block to the left gantry arm on the Scorpion
Rework System
2. Insert the camera articulating arm's stud into the
mounting block. Use the mounting block's knob to
tighten the arm into place.
APR-Rework.com
1
2
© 2020 DESCO INDUSTRIES INC
Employee Owned