Trigger Command; Trigger Control - Uni-Trend UTD2000E Series Manual

Query return 5.000e-003，unit is s.

TRIGger Command

This command is to control trigger sweep mode and trigger standard, trigger decide
when oscilloscope start to collect data and display waveform.

Trigger Control

:TRIGger:MODE

Command format：
:TRIGger:MODE
:TRIGger:MODE?
 Functional description：
Set trigger mode.
<mode> divided into EDGE （edge trigger） , PULSe （ pulse width trigger） , VIDeo （ video trigger） ,
SLOPe（slope trigger）, ALTernat（alternative trigger）.

Return format：
Query return trigger mode

For example：
:TRIGger:MODE EDGE
:TRIGger:MODE?
:TRIGger:SWEep

Command format：
:TRIGger:SWEep
:TRIGger:SWEep?

Functional description：
Set trigger sweep mode.
AUTO：If there has no trigger term, internal will produce trigger signal to force trigger.
NORMal：Trigger only when in trigger term.
SINGle：In trigger term, trigger one time and stop.

Return format：
Query return trigger sweep mode {AUTO|NORMal|SINGle}.

For example：
:TRIGger:SWEep AUTO
:TRIGger:SWEep?
UTD2000E Series Osilloscope Programming Manual
<mode>
edge trigger
query return EDGE
{AUTO|NORMal|SINGle}
set channel 1 as AUTO mode
query return AUTO
UNI-T