Subscribe to Our Youtube Channel
Summary of Contents for ClearOne Scan Converter
- Page 1 Scan Converter Installation & Operation Manual ClearOne, formerly VideoLabs ClearOne Communications, Inc. ~ 1825 Research Way, Salt Lake City, UT 84119 ~ tel 1-800-945-7730 ~ fax 1-800-933-5107...
-
Page 2: Table Of Contents
Connecting the Scan Converter ........ -
Page 3: Professional Services
Professional services If you need additional information on how to install, set up, or operate your Scan Converter, please contact us. We welcome and encourage your comments so we can continue to improve our products and serve your needs. ClearOne Communications ~ 1825 Research Way ~ Salt Lake City, UT 84119... -
Page 4: Controls And Connections
E. S-Out. connects to an S-video device. Connecting the Scan Converter 1. Make sure the Scan Converter, PC, and TV are all powered off. 2. Properly connect the 15-pin HD extension cable between the VGA card and VGA In on the input port. -
Page 5: Operation
Using the onscreen interface The Scan Converter uses four buttons (on the top of the unit) to adjust the image display on the monitor.The menus and options are displayed on the monitor. Use these buttons to navigate through the menu and select the options. - Page 6 By default, the television picture is in Overscan mode, meaning the border of the pic- ture is outside the visible area of the television screen.The Scan Converter also fea- tures Underscan mode, which linearly scales the input picture into the visible part of the television screen.
-
Page 7: Care And Storage
• Keep the unit away from food and liquid. • Clean exterior of scan converter by wiping with a clean, damp cloth; do not use abrasive chemicals. Do not store or operate the Scan Converter under the following conditions: •... -
Page 8: Appendix
Warranty ClearOne Communications, Inc. (Manufacturer) warrants that this product is free of defects in both materials and workmanship. Should any part of this product be defective, the Manufacturer agrees, at its option, to: Repair or replace any defective part free of charge (except transportation charges) for a period of one year from the date the end user is invoiced for the product, provided the end user returns the product to ClearOne Communications or an authorized ClearOne dealer according to the Product Return and Repair Policy set forth below. -
Page 9: Compliance
Manufacturer’s Address 1825 Research Way Salt Lake City, UT 84119 Declares that Product Scan Converter Conforms to the following product specifications – Safety International: IEC 950:1991 – Europe: EN 60950: 1992 This product complies with the requirements of the Low Voltage Directive 72/23/EEC.
Need help?
Do you have a question about the Scan Converter and is the answer not in the manual?
Questions and answers