Advertisement
Grounds:
Connection:
Dimensions:
Color:
Note: When using tube or valve amps, we suggest adding 150 ohm 3 watt resistors
in parallel across each amplifier left and right output.
Warranty
Knöll Systems warrants its products sold in the USA and Canada by authorized Knöll dealers to be free of defects in
materials and workmanship. This warranty extends for two full years from the date of purchase by the original
consumer. Any products returned to Knöll Systems and found to be defective by Knöll Systems within the warranty
period will be repaired or replaced at Knöll Systems option, at no charge. Knöll Systems will not be responsible for the
actual cost of installation or removal of the product, nor for any incidental or consequential damages. Some states do
not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to
you. This warranty gives you specific legal rights. You may have additional legal rights that vary from state to state.
The VI1x6 has no user replaceable parts.
Knoll Systems
145 Tyee Drive Point Roberts, WA 98281
11791 Machrina Way, #120 Richmond BC V7A 4V3
tel (604) 272 4555, fax (604) 272 5595
www.knollsystems.com
Made in Canada. VI1x6 guide.doc 1999-2002 Knoll Systems. All Rights Reserved
Independent left/right grounds for
safe connection of all amplifier types
except tube or valve amps. See below.
Detachable screw terminals capable of 12-22 awg wire
17" x 12" x 1.75" (43 x 30 x 4.5 cm)
Black
Advertisement
