Do you have a question about the LT and is the answer not in the manual?
Questions and answers
Summary of Contents for CanadianPond LT
Page 1
OWNER’S MANUAL WATER WEEDSICKLE MODEL – LT CAUTION – VERY SHARP KNIVES Before assembling or operating your Water Weedsickle, please carefully read the SAFETY, ASSEMBLY, OPERATING INSTRUCTIONS and WARRANTY included in this manual. If you have any questions or require assistance, please contact us at...
Page 2
WATER WEEDSICKLE – LT SAFETY INSTRUCTIONS THE CUTTING KNIVES ARE EXTREMELY SHARP. Always handle the Water Weedsickle with care. NEVER OPERATE THE WATER WEEDSICKLE WITH PEOPLE OR PETS IN THE WATER. When cutting weeds, beware of objects in the water such as dock supports, swim ladders, boat lifts, water or power lines, ropes etc.
Page 3
WATER WEEDSICKLE – LT ASSEMBLY INSTRUCTIONS CAUTION – VERY SHARP KNIVES Remove the following two (2) contents from the shipping carton; Tube Assembly Cutter Bar Assembly Cutter Bar Assembly / Tube Assembly Remove the two (2) 1/4” nuts which are loosely attached to the two (2) 1/4” bolts located on the back of the Cutter Bar Install the Tube Assembly to the Cutter Bar Mounting Bracket so that the two (2) 1/4”...
Page 4
WATER WEEDSICKLE – LT OPERATING INSTRUCTIONS Clamp the Water Weedsickle to the desire location on your boat. We recommend mounting the machine on the transom as close to the motor as possible to minimize the drag affect of the Cutter Bar. For small boats (12’ and under) mounting the Water Weedsickle to the transom and rowing is a very effective method of cutting weeds.
Page 5
(excluding parts and labour) to effectuate repairs under this warranty. In no event shall the manufacturer or Canadianpond be liable for incidental, consequential, or other damages resulting from use of these products. This includes but is not limited to, damage to property, damages based upon inconvenience or loss of use of these products, use of product in violation of any laws or restrictions, or personal injury.
Need help?
Do you have a question about the LT and is the answer not in the manual?
Questions and answers