Page 1
TouchElex Sirius Series Smart Watch User Manual Sirius TGW101 Thank you for purchasing our products. This manual contains the safety guidelines, warranty, and operating instructions. Please review this manual thoroughly before using your device. All pictures in this manual are for illustration purposes only. Actual products may vary...
This manual gets you quickly started with setting up your watch. The setup ensures that your device can synchronize its data with the TouchElex app, where you can get detailed information on your stats, view historical trends, log sleep, and more. As soon as the setup is complete, you’re ready to start moving.
Page 5
When the watch shows that the battery is low, connect the watch to a USB port with 5V-500mA. While the watch charges, there is a battery progress bar on the screen and you can check the battery level at any time. NOTE: While the watch is charging, any of the watch's functions are temporarily unavailable.
Disassembling / Assembling Your Watch Disassembly To remove the wristbands, turn over the watch and find the quick-release lever. While pressing the quick-release lever inward, gently pull the wristband away from the watch to release it. Repeat on the other side. Assembly To reattach the wristbands, slide the pin (the side opposite the quick-release lever) into the notch on the watch.
Using Your Watch App Installation Use the watch with our customized TouchElex app. You can download TouchElex from App Store/Google Play or scan the QR code below to download. NOTE: TouchElex app is only compatible with smartphones, not tablets or PCs.
Pairing the Watch with Your Phone Please pair the watch with your phone in the TouchElex app, NOT in the Bluetooth settings of your phone. Please make sure the watch is "on" and running.
Reboot/ Power off/ Reset Here are two ways to enter the “reboot/ power off/ reset” screen: Press the physical button -> hold-down the physical button for 3 to 5 seconds Press the physical button -> Swipe up-> Settings->Swipe up->System setting Getting to Know Your Watch Function Button Press...
Watch Interfaces This is a touch screen; swipe the screen to go to different interfaces, tap to enter the function, and swipe the screen to the right to return to the previous interface. The home screen is the clock. On the clock: Swipe up to go to quick settings (Find my phone, wrist sense, do not disturb, torch light, ...
Find your phone Use the watch to locate your phone by making your phone ring. NOTE: Please keep TouchElex app running normally in the background of your phone, otherwise it cannot be used. Raise-to-wake When “Raise to wake” is on, if you raise your wrist to check the time, the screen will wake up automatically.
Function List Tracks your exercise data in 14 sports modes. Check your menstrual cycle Choose the mode that you information. want to start on the watch. Weather forecast for the day. Weather data is obtained through Records your daily activity your phone’s network.
1. Tracking Sports The watch tracks your exercise data in 14 sports modes. Start a sport In the function list, tap and swipe the screen to select a sports mode you want to start. Tap "Set goals" to set your goal and tap "Go" to start. During sports Swipe the screen up/down to flip ...
You can also view detailed data in the app (Go to the "Status" page → tap the exercise you just ended). Please keep TouchElex app running normally in the background of your phone to make sure the workout function works well.
You could also check the records in TouchElex app to analyze the daily, weekly, monthly and annual data. 3. Controlling Phone Music After the watch is connected to your phone, tap on the function list and control the music playing on your phone.
In addition, complete your profile in the app. The watch supports 24 hours heart rate monitoring. Here are the steps to set up: TouchElex app->Heart rate monitoring->Turn on “24 hours HR monitoring”.
In order to improve the accuracy of heart rate monitoring records, please turn off the 24-hour heart rate monitoring function when not using the watch. 6. Message Notification When messages (like Facebook, Twitter, and Instagram messages) come in, the watch vibrates to alert you, and the screen displays the message content.
The watch vibrates to remind you to: (i) get up in the morning, (ii) move around when you have been sitting-down for too long, (iii) drink water, etc. NOTE: The alarm needs to be set up on TouchElex app. Here are the steps: TouchElex->Me->Alarm->Add Alarm If you choose “Remind later”, the alarm will be triggered again 10minutes later.
FAQs Watch keeps disconnecting from smartphone - Use the "TouchElex" app to pair the watch to your phone. - On the app, tap on the "Me" icon at the bottom-right corner of the screen. - Tap on the hexagonal icon at the top-right, then go to "Troubleshooting".
Page 21
- Once you are done, tap on the back arrow on the top-left corner of the screen to apply the settings Watch displays wrong time. - Use the "TouchElex" app to once more pair the watch to your phone NOTE: - Whenever you reconnect the watch to our app, the time and date will be automatically synchronized with the time on your smartphone, via the app.
- Use the "TouchElex" app to pair the watch to your phone. - On the app, tap on the "Me" icon at the bottom-right corner of the screen. - Tap on the hexagonal icon at the top-right, then go to "Unit settings".
Page 23
10. Never try to abuse, crush, open, repair or disassemble this device. Doing so will void the warranty and can result in a safety hazard. 11. If any parts of your product require replacement for any reason, including normal wear and tear or breakage, please contact us. 12.
Need help?
Do you have a question about the Sirius Series and is the answer not in the manual?
Questions and answers