Margi Display-to-Go User Manual page 2

1. Introduction
Thank you for purchasing the Margi Systems Display-to-Go™ or Display-to-Go, 4MB™
Universal CardBus Display Adapter. Display to go allows mobile users to display onto digital or
analog displays. These displays can be flat panel LCD's, projectors, plasma displays, CRT's or
head wearable displays. Display-to-Go™ features include:
• Windows 98 Multiple Monitor Support
•
• Independent size and resolution control of secondary display
• Type II PC Card CardBus interface for easy installation
• Conforms to the Digital Display Working Group (DVI Connector) and VESA (MDR20
Connector) digital standards
• Analog output for CRT monitors
• Easy Plug-and-Play installation
• Choice of VGA, VESA (MD-20), or DVI dongles
This guide contains the information for installation and use of the Display-to-Go CardBus cards.
Please read this guide before using the Display-to-Go card for the first time. The README file
included on the supplied disk may contain more recent information which may not be included in
this guide. Be sure to read the README file as well.
For the purposes of this guide, Display-to-Go and Display-to-Go, 4MB will be referred to
interchangeably. Where differences in procedure, specification, or operation occur, they will be
noted.
Software updates are often posted on the MARGI Systems web site,
Support.
For pure digital visual experience
www.margi.com under