Weathermatic D70 Series Installation Manual

NOZZLE INSTALLATION GUIDE

STEP 1: REMOVE DRIVE ASSEMBLY

STEP 2: INSTALL NEW NOZZLE

• Twist off nozzle/cap (counterclockwise).
• Pull off nozzle assembly.
• Snap in correct nozzle.
(see Performance Chart).

FOR WINDY CONDITIONS

• Turn short range nozzle to
vertical position to improve
distribution patterns.

STEP 3: RE-INSTALL DRIVE ASSEMBLY

• Place new assembly in body.
• Install new snap ring.
• Reinstall nozzle/cap assembly.
(twist on clockwise).
NOTE: Cap is self-tightening,
no need to overtighten.
Full Circle Golf Rotor
NORMAL WINDY
Help Desk: 888-484-3776
support.weathermatic.com
D70 SERIES
99903377_revA