Page 1: Table Of Contents
Infrared Probe 40.01-TX/RX OPERATING INSTRUCTIONS (Translation of the original operating instructions) Page System Components, Technical Data, Dimensions Probe ON / OFF Angle, Transmitting / Receiving Stylus Change, Battery Replacement, Optical Status Display Aligning Stylus to Spindle Centre Infrared Signal Range / Power Off Delay / Battery Life,...
Page 2: System Components, Technical Data, Dimensions
Infrared Probe 40.01-TX/RX System Components Infrared Receiver 91.40-RX/TX/°C Infrared Probe 91.30-RX/TX 40.01-TX/RX Technical Data Dimensions ± ± Probing Directions: Y; -Z ± Max. Overtravel: 12,5°; Z –5mm Customer specified shank Probing Force Z = 7N with 50mm Stylus: X/Y = 1N Recommended 254mm/min –...
Page 3: Probe On / Off Angle, Transmitting / Receiving
Infrared Probe 40.01-TX/RX Probe ON / OFF Angle – during ON / OFF = Receiving = Transmitting Infrared Receiver 91.40-RX/TX/°C ON/Off Range ≤4.0m (13.1’) alternative Infrared Receiver ON/OFF Procedure 91.30-RX/TX ON/OFF Adjustable Range <1,5s <1s ≤1.5m (4.9’) >10VDC ≤2.2m (7.4´) M-Code ≤3.0m (9.8´)
Page 4: Stylus Change, Battery Replacement, Optical Status Display
Infrared Probe 40.01-TX/RX Stylus Change Mounting pin #0885 Attention ! After changing the stylus: Align stylus to spindle centre ≈ 2Nm (1.47 lbf.ft) Calibrate probe Battery Replacement Battery cover #3920 with O-Ring 13x1 Viton #3549 Battery Type CR2 (3V) #3869...
Page 5: Aligning Stylus To Spindle Centre
Infrared Probe 40.01-TX/RX Aligning Stylus to Spindle Centre Set „C“ Screws Adjustment to <20µ Hexagon key AF2mm #1097 Hexagon key AF2.5mm #1346 - Set dial gauge in front of the probe (see pict.) - Turn the probe until the maximum deviation is shown on the indicator - Turn the "A"...
Page 6: Infrared Signal Range / Power Off Delay / Battery Life, Maintenance, Cleaning Jets
Infrared Probe 40.01-TX/RX Infrared Signal Range / Power Off Delay / Battery Life Infrared signal range: There are 3 infrared range settings which can be selected: 1.6m – 3.3m – 4.0m. A reduced range can be useful to ensure that nearby infrared systems are not interfered with.
Page 7: Shank Mounting, Hsk Shanks
Infrared Probe 40.01-TX/RX Mounting the Shank Removing the shank: Remove all „A“ and „C“ screws. Remove shank. Assembling the shank: Ensure the O-Rings are properly seated! Carefully slide the shank onto the probe body. Align the „C“ threads with the conical bores.
Page 8: Tool Holder Vdi
Infrared Probe 40.01-TX/RX Probe with shank SK Available Shanks: Order Number: DIN69871-SK30 94,5 (3.72”) 40.01-SK30 DIN69871-SK30-Mube 94,5 (3.72”) 40.01-SK30-Mube DIN69871-SK40 96,5 (3.8”) 40.01-SK40 DIN69871-SK40-70 120 (4.72”) 40.01-SK40-120 DIN69871-SK50 96,5 (3.8”) 40.01-SK50 DIN69871-SK60 116,5 (4.59”) 40.01-SK60 BT30 77 (3.03”) 40.01-BT30 BT30 94,5 (3.72”)
Page 9: Aligning Probe In Shank With 90°Adapter
Infrared Probe 40.01-TX/RX Probe with other shanks Available Shanks: Order Number: D20-D8-L25-B 65 (2.56”) 40.01-D8-L25 D20-D32-L100-B 62 (2.44”) 40.01-D32-L100 NIKKEN-NC5-46 115,5 (4.55”) 40.01-NC5-46 NIKKEN-NC5-63 115,5 (4.55”) 40.01-NC5-63 D20-Erowa-ITS 91 (3.58”) 40.01-ITS included ® Probe with shank THERMO-LOCK (patented) Available Shanks:...
Page 10: Styli
Infrared Probe 40.01-TX/RX M4-Styli, Shaft-Ø7 M3-Styli, Shaft-Ø4 All styli with ceramic shaft All styli with ruby ball and tungsten carbide shaft Order Number: Order Number: 91.00-T103/6-KE-M4 (Ruby ball) 91.00-TA-M4/M3 (Stylus 91.00-T83/6-KE-M4 Adapter) (Ruby ball) 91.00-T53/6-KE-M4 (Ruby ball) 21.00-T20/1-HM-M3 91.00-T103/6-KE-M4-Si (Silicon nitride ball) 21.00-T20/2-HM-M3...
Page 11: Spare Parts, Accessories
Infrared Probe 40.01-TX/RX Spare Parts, Accessories Probe Parts Order Number Description #3869 Battery Type CR2 (3V) #3920 Battery cover O-Ring 13x1 Viton #3549 for battery cover #1351 Clamping screw AF2.5mm #1352 Adjustment screw DIN913 M4x8 (AF2mm) #3240 Service cover O-Ring 16x1 Viton...
Page 12 Infrared Probe 40.01-TX/RX Spare Parts, Accessories Accessories Order Number Description Toolbox: 1x Mounting Pin #0885 40.01-TB 2x Hexagon key AF2mm #1097 1x Hexagon key AF2.5mm #1346 Air Nozzle with rotary joint 91.00-SWV for VDI shanks D20-VDI-90° 90°Adapter for Tool Holder VDI...

This manual is also suitable for:

40.01-rx