Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Sentera Controls MDB-M-6
- Page 1 MDB-M-6 POWER OVER MODBUS DISTRIBUTION BOX Mounting and operating instructions...
- Page 2 SAFETY AND PRECAUTIONS PRODUCT DESCRIPTION INTENDED AREA OF USE TECHNICAL DATA STANDARDS WIRING AND CONNECTIONS MOUNTING INSTRUCTIONS IN STEPS VERIFICATION OF INSTALLATION TRANSPORT AND STORAGE WARRANTY AND RESTRICTIONS MAINTENANCE MIW-MDB-M-6-EN-000 - 07 / 09 / 2021 2 - 7 www.sentera.eu...
- Page 3 In case there are any questions that are not answered, please contact your technical support or consult a professional. MIW-MDB-M-6-EN-000 - 07 / 09 / 2021 3 - 7 www.sentera.eu...
- Page 4 <= 16 A per phase and not subject to conditional connection ■ WEEE Directive 2012/19/EU ■ RoHs Directive 2011/65/EU MIW-MDB-M-6-EN-000 - 07 / 09 / 2021 4 - 7 www.sentera.eu back to the table of contents...
- Page 5 Make sure that supply voltages from different power sources do not come into ATTENTION contact with each other. Never connect cables in the MDB-M-6 with Power wires (pins 1,2,7 and 8), connected to different Power supplies. If the connected units have a different Power supply, only crimp the data wires (pins 3,4,5,6) in the RJ45 connectors.
- Page 6 (*)Make sure that supply voltages from different power sources do not come into ATTENTION contact with each other. Never connect cables in the MDB-M-6 with Power wires (pins 1,2,7 and 8), connected to different Power supplies. If the connected units have a different Power supply, only crimp the data wires (pins 3,4,5,6) in the RJ45 connectors.
- Page 7 In these circumstances, the unit should be disconnected from the main supply. Pay attention that no fluids enter the unit. Only reconnect the controller to the main supply when it is completely dry. MIW-MDB-M-6-EN-000 - 07 / 09 / 2021 7 - 7 www.sentera.eu...
Need help?
Do you have a question about the MDB-M-6 and is the answer not in the manual?
Questions and answers