MAHLE CAD-DPF1 Operation Manual

1-box dpf adapter

Advertisement

Quick Links

MAHLE CAD-DPF1
Operation Manual
EN
1-Box DPF Adapter

Advertisement

Table of Contents
loading

Summary of Contents for MAHLE CAD-DPF1

  • Page 1 MAHLE CAD-DPF1 Operation Manual 1-Box DPF Adapter...
  • Page 2 | 2 | CAD-DPF1 EVERY PERSON WHO OPERATES THIS EQUIPMENT NEEDS TO KNOW AND UNDERSTAND ALL OF THE INFORMATION IN THIS MANUAL – FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH. READ THIS MANUAL CAREFULLY AND...
  • Page 3: Table Of Contents

    CAD-DPF1 | 3 | en Contents 1. Safety Regulations ..........4 Warnings............4 2. Foreword..............5 From the manufacturer .........5 3. Symbols Use ............5 Signal words ..........5 4. Responsibilities ............6 Receiving Inspection ........6 Owner and/or operator responsibilities ..6 5. Operation ..............7 Handling a DPF using the DPF Adapter ..7 WARNING ...........7...
  • Page 4: Safety Regulations

    | 4 | CAD-DPF1 1. Safety Regulations 1.1 Warnings Read and understand all of the instructions and warnings on the on-product labeling and in the owner’s manuals of the jack and the adapter before using the adapter. Do not exceed the capacity of the adapter.
  • Page 5: Foreword

    Thank you for your purchase. To complement the offering Signal words call attention to a safety message or of A/C, fluid and nitrogen service equipment, MAHLE messages, or a property damage message or messages, Service Solutions has partnered with Gray Manufacturing and designate a degree or level of hazard seriousness.
  • Page 6: Responsibilities

    | 6 | CAD-DPF1 4. Responsibilities 4.1 Receiving Inspection Before attempting to operate this equipment, thoroughly read and understand this manual. Completely remove all tape and packaging. Inspect the equipment immediately upon delivery. If shipping damage is evident, inform the...
  • Page 7: Operation

    CAD-DPF1 | 7 | en 5. Operation 5.1 Handling a DPF using the DPF Adapter 1. Remove the adjustable brackets from the jack’s lift platform. 2. Use the 1/2-13 nuts to secure the adapter to the jack’s lift platform. 3. Slowly raise the adapter to the DPF taking care not to crush the DPF.
  • Page 8: Notes

    | 8 | CAD-DPF1 6. Notes...
  • Page 9 CAD-DPF1 | 9 | en...
  • Page 10 | 10 | TSL-50 MAHLE Aftermarket Inc. 916A West State Street, St. Johns, MI 48879 Phone: (800) 468-2321 Fax: (717) 755-8304 E-mail: tech.mss@us.mahle.com www.servicesolutions.mahle.com...

Table of Contents