Advertisement
WIRES-X Connection Cable Kit
Installing the PC Connection Cable driver software on a computer makes data transmission possible.
Furthermore, if you have an internet environment on the go, using a compatible transceiver:
FTM-400XDR/DE / FTM-400DR/DE / FTM-300DR/DE / FTM-200DR/DE / FTM-100DR/DE / FT5DR/
DE / FT3DR/DE / FT2DR/DE (as of May 2022), you can use the WIRES-X Portable Digital Node
(PDN) function to open a digital node station and enjoy more agile operation.
WIRES-X Connection Cable included items:
SCU-57: PC Connection Cable SCU-55, CT-44, and two audio cables
SCU-58: PC Connection Cable SCU-56 and an audio cable
SCU-39: PC Connection Cable SCU-19, CT-44, and two audio cables
SCU-40: PC Connection Cable SCU-20 and an audio cable
Do not connect the transceiver to the computer via the PC Connection Cable until the driver
installation process has been completed. Connecting the PC Connection Cable to the computer
before the driver installation has been completed may result in the wrong driver being installed
and preventing proper operation.
System Requirements
Operating Systems
WIRES-X Connection Cable
SCU-57 / SCU-58
SCU-39 / SCU-40
NOTE: The SCU-39/SCU-40 can use the same driver software as the SCU-57/SCU-58, but
the SCU-39/SCU-40 cannot be used with Windows 11.
Port
USB port (USB1.1/USB2.0)
Compatible transceiver
• WIRES-X Connection Kit SCU-57:
• WIRES-X Connection Kit SCU-58:
NOTE: FTM-6000R/E can use programming software with SCU-58/SCU-40, but it does not
support the WIRES-X portable digital node function.
Important Notes
• All responsibility for the use of this software lies with the customer. Yaesu cannot be held responsible
in any way for any damages or losses, which may be incurred by the customer as a result of using
this software.
• Downloaded files are for personal use only.
SCU-57 / SCU-58
(for Windows 8.1/10/11)
Driver Installation Manual
Windows
FT5DR/DE / FT3DR/DE / FT2DR/DE
FTM-400XDR/XDE / FTM-400DR/DE / FTM-300DR/DE
FTM-200DR/DE / FTM-100DR/DE / FTM-6000R/E
11
Windows
10
®
®
1
Windows
8.1
®
Advertisement
Table of Contents
Related Manuals for Yaesu 58-SCU
Summary of Contents for Yaesu 58-SCU
- Page 1 Important Notes • All responsibility for the use of this software lies with the customer. Yaesu cannot be held responsible in any way for any damages or losses, which may be incurred by the customer as a result of using this software.
- Page 2 Trademarks Microsoft , Windows , Windows 8.1, Windows 10, and Windows 11 are registered trademarks ® ® ® ® ® in the United States and other countries. Installing the Virtual COM Port Driver 1. Right-click the downloaded zip file “PL23XX_Prolific_DriverInstaller_vXXX.zip”. 2.
- Page 3 4. Double-click the [PL23XX-M_LogoDriver_Setup_XXX_XXXXXXXX.exe] file in the unzipped folder. Double-Click 5. If the “User Account Control” screen appears, click the [Yes] button. 6. Click the [Next >] button. The installation will start. 7. Click the [Finish] button to complete the driver installation.
- Page 4 How to Confirm the Installation, and the COM Port Number to the PC USB port. 1. Refer to the below figure and connect the PC connection cable SCU-55 or SCU-19 DATA Jack DATA Jack SCU-56 or SCU-20 2. Right-click the Windows [Start] button, then click [Device Manager]. The Device Manager screen opens.
- Page 5 3. If the “User Account Control” screen appears, click the [Yes] button. 4. On the Device Manager screen, double-click [Port (COM & LPT)]. Double-Click Confirmation 5. If the following is displayed, the driver installation is completed normally. SCU-55/SCU-56: Prolific PL2303GC USB Serial COM Port (COM**) SCU-19/SCU-20: Prolific USB-to-Serial Comm Port (COM**) The number in the “(COM**)”...
- Page 6 Copyright 2022 YAESU MUSEN CO., LTD. All rights reserved. No portion of this manual may be reproduced without the permission of YAESU MUSEN CO., LTD. YAESU MUSEN CO., LTD. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-0002 Japan YAESU USA 6125 Phyllis Drive, Cypress, CA 90630, U.S.A.
Need help?
Do you have a question about the 58-SCU and is the answer not in the manual?
Questions and answers