Summary of Contents for USA Industries TLD-2500
- Page 1 I N D U S T R I E S TLD-2500 TUBE TESTING GUNS OPERATING MANUAL AIR INJECTION GUN PLUGGING GUN www.USAIndustries.com (713) 941-3797 • (800) 456-8721 315 State Street • S. Houston, TX 77587 M-OM-TLD2500-1.1...
- Page 2 TLD-2500 TUBE TESTING GUNS OPERATING INSTRUCTIONS Contents 1. Air Injection Gun Illustration and Parts Listings 2. Plugging Gun Illustration and Parts Listings 3. Operating Procedures 5 - 7 4. TLD-2500 Sizing Chart Fully Packaged TLD 2500 Kit in Custom Case...
- Page 3 Replace X with appropriate Seal Stem Size Number i.e. 1, 2, or 3 Replace NNNN with required seal size. Refer to sales catalog or call USA Industries. Inc. for a complete range of sizes Part Number is given for reference only. Any attempt to perform service on cylinders may void any and all remaining warranties, implied or otherwise stated.
- Page 4 Replace X with appropriate Seal Stem Size # (1, 2, or 3) Replace NNNN with required seal size. Refer to sales cata log or call USA Industries for a complete range of sizes *** Part Number is given for reference only. Any attempt...
-
Page 5: Prior To Testing
3. Affix air hose with air supply to Air Injection Gun. 4. USA Industries’ TLD 2500 Test Guns function on air supplies from 40-125 psi (2.7-8.6 Bar) with a minimum of 5 cubic feet per minute (CFM). These limitations vary due other to pneumatic tools and units that maybe online within your plant environment. - Page 6 TLD-2500 TUBE TESTING GUNS OPERATING INSTRUCTIONS 5. Insert the Air Injection Gun into one tube end and the Plugging Gun on the opposite end of the tube being tested. Apply enough pressure to seat the plastic washer (Fig. 1 & Fig. 2 Item 4) firmly against the end of the tube.
- Page 7 TLD-2500 TUBE TESTING GUNS OPERATING INSTRUCTIONS 4. Replacing the Shaft Support Tube Assembly: The TLD Test Guns are shipped from the factory with three sets of seal stems (Fig. 1 & Fig. 2 Item 3) tube assemblies. Tube test inside diameters (ID) are: Stem I - .28”...
- Page 8 TLD-2500 SIZING CHART TLD-2500 OPERATING INSTRUCTION MANUAL www.USAIndustries.com | (713) 941-3797 ©2022, USA Industries M-OM-TLD2500-1.1...