Advertisement
SEATPOST MOUNTING - TRACER
Additional brackets, silicone bands and a saddle rail bracket are available from exposurelights.com
The tab-end fastens onto the lug.
Click the TraceR
securely into place.
WARNING: The TraceR
bracket is angled so the light
will shine directly back when
correctly attached, make sure
it is in the correct orientation.
EXPUG1.4.indd 4-6
EXPUG1.4.indd 4-6
DAYBRIGHT
We recommend using your light in DayBright mode during the day for your safety.
To access DayBright mode you need to be in Program 1 for the Trace and TraceR, or High for the
Link and Link+, and then cycle to the Flash mode using the function button.
OPTIMISED MODE SELECTOR (OMS)
OMS allows you to select a runtime tailored to your needs, the longer the runtime the lower the
lumen output, if you double runtime, you halve lumen output.
OMS: TRACE & TRACER
The Trace & TraceR have three programs with different intensities and run times:
PROGRAM
MODE
CONSTANT
HIGH (PGM 1)
3 hrs
MEDIUM (PGM 2)
6 hrs
LOW (PGM 3)
12 hrs
To select a program, start with the light off. Hold the Function Button down and wait for the light to
emit regular flashes. Then for example, if you want Medium (Program 2), release the button after
the second flash. The light will remain in Program 2 regardless of it being turned on and off.
The Table below is etched onto the light:
H - High
CON - Constant
M - Medium
PUL - Pulse
L - Low
ReAKT & PELOTON MODE (TRACER ReAKT ONLY)
ReAKT and Peloton mode work in all three of the programs, if you are in Program 2 and you want
to activate ReAKT you would follow the same method as the OMS, but release after the fourth flash.
Your light will then be in Program 2 with ReAKT activated. There is is a break down below:
Flash 1 – Program 1.
Flash 2 – Program 2.
Flash 3 – Program 3.
Flash 4 – ReAKT activated (light remains in the Program is in).
Flash 5 – Peloton Mode activated (light remains in the Program is in).
Flash 6 – Deactivate ReAKT and Peloton (light remains in the Program is in).
OMS LINK & LINK+
LINK/LINK+
The Link & Link+ have three programs with different intensities and run times, within those
programs are options that use either 1 or 2 LEDs with flash or constant modes, or a combination.
To select a program, start with the light off. Hold the Function Button down and wait for the light to
emit regular flashes.
For example, if you want Program 2, release the button after the second flash. The light will remain
in Program 2 regardless of it being turned on and off.
For a breakdown of runtimes and modes please refer to the table below:
WHITE LED
RED LED
PULSE
CONSTANT
CONSTANT
6 hrs
12 hrs
CONSTANT
PULSE
24 hrs
PULSE
PULSE
CONSTANT
OFF
OFF
CONSTANT
PULSE
OFF
OFF
PULSE
The etch on the underside of the Link and Link+ does not display all modes due to space.
It shows the number of LEDS in use to condense information.
PGM - Program
CW - Constant White LED
CR - Constant Red LED
FW - Flash White LED
FR - Flash Red LED
F W/R - Flash White and Red
C - Constant
F - Flash
LINK
LINK+
MODE
1 HIGH
2 MEDIUM
3 LOW
1 HIGH
2 MEDIUM
3 LOW
1
1 hrs
3 hrs
6 hrs
3 hrs
6 hrs
12 hrs
2
2 hrs
4 hrs
8 hrs
4 hrs
8 hrs
16 hrs
3
3 hrs
7 hrs
15 hrs
8 hrs
16 hrs
32 hrs
4
2 hrs
5 hrs
11 hrs
5 hrs
10 hrs
20 hrs
5
2 hrs
5 hrs
11 hrs
5 hrs
10 hrs
20 hrs
6
5 hrs
11 hrs
23 hrs
12 hrs
24 hrs
48 hrs
7
5 hrs
11 hrs
23 hrs
12 hrs
24 hrs
48 hrs
Link
Link+
13/08/2020 14:52
13/08/2020 14:52
Advertisement
