Advertisement
Quick Links
LED Light Strip
User's Guide for Model IAT60 v2413-01
Features
•
Length: 6.5 ft/2M
•
Width: .4 in/10mm
•
32 LEDs total (5050 RGB LED)
•
5V USB power input
•
Self adhesive, double sided backing
Installation
1. Clean the surface to which you're going to attach the light strip. The example shown below represents the
back of a TV or computer monitor.
2. Peel the backing strip off the adhesive tape on the LED strip.
3. Press and hold the LED strip to the surface.
4. Connect the USB cable to a USB port on the TV or monitor, or a USB power adapter (not Included).
5. Use the remote to change LED color, brightness, and flash settings.
Fold at corners as shown.
The remote receiver is built
into the USB power cable.
•
The remote receiver does not need to be visible or have direct line of sight with the remote, and can be
fully hidden behind your TV, monitor, etc.
•
You may cut the strip to fit smaller areas. Using scissors, cut on the visible line between LEDs.
Includes
•
USB cable with built-in remote receiver
•
Remote control with CR 2025 battery included
Back of TV or Monitor
Connect USB plug
to an available USB
outlet or a USB power
adapter (not included)
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for iLive IAT60
Summary of Contents for iLive IAT60
- Page 1 LED Light Strip User’s Guide for Model IAT60 v2413-01 Features Includes • Length: 6.5 ft/2M • USB cable with built-in remote receiver • Width: .4 in/10mm • Remote control with CR 2025 battery included • 32 LEDs total (5050 RGB LED) •...
- Page 2 Remote Control Brightness Adjustment Up/Down Power ON/OFF Press for red lights only. Flash 3 Press for green lights only. The LEDs will quickly change between 3 colors. Press for blue lights only. Slow The LEDs will slowly change Press for white lights only. between 3 colors.
Need help?
Do you have a question about the IAT60 and is the answer not in the manual?
Questions and answers