Table of Contents
Advertisement
Quick Links
Front to Rear Dispense
Author: Tom Hall
Engineering:
Manufacturing:
Quality Assurance:
Compliance Engineering:
File - 000010
Printed copies of this electronically controlled document are valid only for the day in which it is printed
ArcaCash 2600
Conversion
Work Instruction
Edition 01
Cover Page
Date: 10/3/06
Date:
Date:
Date:
Date:
10/11/2006 1:53:00 PM
Advertisement
Table of Contents
Summary of Contents for ARCA ArcaCash 2600
- Page 1 Cover Page ArcaCash 2600 Front to Rear Dispense Conversion Work Instruction Edition 01 Author: Tom Hall Date: 10/3/06 Engineering: Date: Manufacturing: Date: Quality Assurance: Date: Compliance Engineering: Date: File - 000010 10/11/2006 1:53:00 PM Printed copies of this electronically controlled document are valid only for the day in which it is printed...
- Page 2 Work Instruction Page ii 1 Introduction ..........................1 Purpose............................1 Scope ............................1 Tools and Materials Required ....................1 Safety ............................1 2 Conversion Procedure......................1 Remove and Reassemble the Cosmetic Door to Back Side of Safe........1 Remove and Reassemble the Shutter Assembly..............2 Remove the Dispenser ......................2 Reconfigure the Safe........................2 Converting the Dispenser ......................3 Reinstalling the Dispenser .......................4...
- Page 3 Introduction 1.1 Purpose On occasion it is necessary to convert a fully integrated front dispensing (through safe door) ArcaCash 2600 to a rear dispense (through rear safe wall) configuration. This procedure defines step-by-step the process for performing that conversion and is based on converting a 425-580-6605 Arca2600 (UL 291 Level 1 F/A) into a 425-580-6625 Arca2600 (UL 291 Level 1 R/A).
- Page 4 Work Instruction Page 2 6. Reassemble lower hinge blocks to the rear left side of safe with pins extended toward the rear of the safe. 7. Reinstall cosmetic door with hinge pins and washers. 8. Adjust hinge mounting screws as needed to ensure that the cosmetic door keylatch properly engages the latching features in rear wall of safe.
- Page 5 Work Instruction Page 3 29. Push the shutter and dispense indicator light cables up through the rubber grommet in the upper right cable trough and pull out the front, through opening left by removing the power switch plate. Cut cable ties and discard.
- Page 6 Work Instruction Page 4 unit. Restrain the PRC cable by running it through the plastic-coated retaining tabs. There are two beneath the presenter and two along the length of the top unit. 48. Reconnect PRC cable to the power/controller pc board. 49.
- Page 7 Work Instruction Page 5 2.8 Dispenser Photographs File - 000010 10/11/2006 1:53:00 PM Printed copies of this electronically controlled document are valid only for the day in which it is printed...
Need help?
Do you have a question about the ArcaCash 2600 and is the answer not in the manual?
Questions and answers