■
Common Interface
●
Turn the TV off with Mains Power On / Off switch
whenever inserting or removing the CI module.
●
If a smart card and a CI module come as a set, first
insert the CI module, then insert the smart card into
the CI module.
●
Insert or remove the CI module completely in the
correct direction as shown.
●
Normally encrypted channels will appear. (Viewable
channels and their features depend on the CI
module.)
If encrypted channels do not appear
[Common Interface] in the Setup Menu
●
There might be some CI modules in the market
with older firmware versions that do not work fully
interoperable with this new CI+ v1.3 TV. In this case,
please contact your content provider.
●
For details, refer to [eHELP] (Functions > Common
Interface), read the manual of the CI module, or
check with the content provider.
TV
■
USB HDD (for recording)
●
Use USB 1 port for connecting the USB HDD.
●
For details, refer to [eHELP] (Recording).
■
VIERA Link
●
Use HDMI1 - 4 for VIERA Link connection.
●
For details, refer to [eHELP] (Functions > VIERA Link
"HDAVI Control™").
CI module
Cable arrangement
Fix the cables using the cable tie.
50-inch model
58-inch model
After fixing the cables, attach the cable cover / terminal
cover to the TV.
■
Fixing the cables using the cable tie
Attach the cable tie
Insert the cable tie in a hole
Bundle the cables
Set the tip in the hooks
Hooks
To loosen:
Keep pushing the knob
Knob
To remove from the TV:
Snaps
Keep pushing both side snaps
●
Fix cables as necessary.
●
When using the optional accessory, follow the option's
assembly manual to fix cables.
Hole
English
19