Summary of Contents for Seaira Global WATCHDOG NXT600C
Page 1
2. Next, remove the side panel so you have access to the pump (the side with the sensor vents). For more details on removing the side panel, check out the “How to Remove the Side Panels” Guide. Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445 www.seairaglobal.com...
Page 2
3. Use the quick connect to remove the drain tube from the pump. 4. Next, remove the two screws holding the pump head in place, using a Philips head screwdriver. Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445 www.seairaglobal.com...
Page 3
5. Use a flathead screwdriver to lift the pump head off the reservoir. 6. Wipe the base of the pump clean using paper towels. Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445 www.seairaglobal.com...
Page 4
7. Wipe the reservoir clean using paper towels. 8. Fill the pump reservoir with the prepared cleaning solution. Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445 www.seairaglobal.com...
Page 5
9. Reassemble the pump, then use the manual drain button to flush mixture through the tubing. 10. Pour clean water into the drain tray until you hear the pump energize twice (typically 16-32 ounces). 11. Reassemble the unit. Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445 www.seairaglobal.com...
Need help?
Do you have a question about the WATCHDOG NXT600C and is the answer not in the manual?
Questions and answers