KingsBottle WCD25 Assembly Instructions

Wine Rack/Cube Assembly Instructions | WCD25

STEP 1 - BOTTOM FRAME

• Assemble the bottom metal frame on a flat surface.
• Line up and hammer the timber slats into the metal
frames using a rubber mallet. Make sure it's fully
hammered in.
• Start from the center.
( Instruction Video )
A
B
C
D

STEP 2 - TOP FRAME

Insert one section of the metal frame only halfway
down into the wood pieces.
( Instruction Video )
E
Insert the 2nd section of the metal frame into the 1st
and use a rubber mallet to complete the installation
into the wood pieces.
F