Table of Contents
Advertisement
Quick Links
CABIN MOUNTING INSTRUCTION
APOLLO
80x80 i 90x90 x 215 cm
MODEL QA018
Dear Clients, thank you for choosing our shower cabin.
Before you start using the cabin, please thoroughly read the instruction and mount it in
accordance with instructions contained within it.
In order to ensure your satisfaction and a defect-free use of Midas Group products we suggest
mounting our cabins by authorized service crews.
The list of service crews is available at the end of this instruction or on the website:
www.midasgroup.com.pl
MG/APOLLO-80/80-90/90-215/01-2019_1.0
MIDAS Group 2019
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Midas APOLLO QA018
- Page 1 Before you start using the cabin, please thoroughly read the instruction and mount it in accordance with instructions contained within it. In order to ensure your satisfaction and a defect-free use of Midas Group products we suggest mounting our cabins by authorized service crews.
- Page 2 Once the cabin has been mounted , free space must be left around it, as shown on Figure The manner of mounting the cabin in the corner of a room must ensure freedom of carrying out maintenance and servicing works. Fixing the cabin to the wall is not recommended. MIDAS Group 2020...
- Page 3 Connect water installations of upper shower, hand shower and foot massager. Connect water installations to cabin system. Connect water outflow of the shower base. Having done the above actions check tightness of the whole water system. MIDAS Group 2020...
- Page 4 NOTE! In case of connecting the cabin to water installation use electrical leader hoses in metal shielding. Hoses should be ended with 1/2 internal thread nuts”. The recommended nominal hose flow amounts to 15 l/min; the recommended nominal maximum operating pressure of the hose equals 4 bars. MIDAS Group 2020...
- Page 5 While regulating the sliding glass doors, maintain special caution. Glass doors must tightly adjoin to each other after closing them and the sliding cannot be hindered, otherwise you must regulate the screws that fix the rolls or check if magnetic gaskets are placed in the right way. MIDAS Group 2020...
- Page 6 All above indicated components may be purchased in hydraulic stores. ball valve fixed water installation pipe of the room Water tube in metal shielding (water inlet to cabin mixer) MIDAS Group 2020...
-
Page 7: Maintenance
Until complete drying one should leave the doors open and ensure good room ventilation. The cleaning cloth which is used cannot contain fibres of possess scrub or scratch properties. MIDAS Group 2020... -
Page 8: Safety Provisions
This instruction must be kept in order to use it in the future or to be able to pass it onto the future user. This instruction was elaborated for various models and versions; therefore, the product may differ from the examples specified in the schemes. Nevertheless, the instructions do not change. MIDAS Group 2020... - Page 9 Company MIDAS Group Sp. z o.o., Sp. K. reserves the right to introduce all changes, considered as appropriate, without an obligation of prior notification or exchange. This product may be designated solely for use in accordance with its target designation.
-
Page 10: Cleaning And Maintenance
Water should be drained immediately after the shower, which should be followed by cleaning the cabin and switching off power supply. For the cabin with hydromassage to preserve its initial polish for many years, it is recommended to use water with temperature not exceeding 60°C. MIDAS Group 2020... -
Page 11: Transportation And Storage
Each component is made in compliance with our patterns and detailed information regarding the principles of their functioning and use may be provided by our service crew: MIDAS GROUP Sp. z o.o., Sp. K. Al. San Francisco 2, 55-020 Rzeplin tel. 71,337 25 78 71,337 25 79 fax.: 71,337 25 52... -
Page 12: Function Switch
FUNCTION - muscle relaxation SWITCH - painkilling properties Individual functions are supported by turning the handle of function switch to the left or to the right. These functions are independent from one another and cannot work simultaneously. MIDAS Group 2019... - Page 13 NOTE! Complete switch off of the device from the network occurs after pulling the plug out of the socket or switching off the switch located in power supply installation of the cabin. Having finished using the cabin switch off the power. MIDAS Group 2019...
- Page 14 Mounting of the shower base version: A 1-3mm M4 x16 M4 x16 M4 x16 M4 x16 M4 x16 M4 x20 MIDAS Group 2019...
- Page 15 Mounting of the shower base version: B 1-3mm M4 x16 M4 x16 M4 x16 M4 x16 M4 x16 M4 x20 MIDAS Group 2020...
- Page 16 You may use shower base or bathtub siphons available on the market in order to connect the shower base outflow to the draining system of the room. EXAMPLES OF SIPHONS AVAILABLE ON THE MARKET MIDAS Group 2019...
- Page 17 Tools: M4x16 x17 M4x12 x4 M4x10 x4 M3,5x25 x8 M4x20 x8 M4x20 x8 5 ≠ 6 MIDAS Group 2019...
- Page 18 5 ≠ 6 MIDAS Group 2019...
- Page 19 MIDAS Group 2019...
- Page 20 5 ≠ 6 MIDAS Group 2019...
- Page 21 M4 x20 MIDAS Group 2019...
- Page 22 M4x10 M4x10 MIDAS Group 2019...
- Page 23 After sealing with a silicone wait a minimum of 24 hours. MIDAS Group 2019...
- Page 24 15. Company Midas Group shall bear any costs of disassembly of elements that hinder access to the product, such as: tiles or costs of reinstating these elements into their initial state after a warranty-based repair.
- Page 25 LIST OF AUTHORZIED SERVICE CREWS OF COMPANY MIDAS GROUP Montaż Hydromasaży, Tomasz Borzym, 603-805-900, LOWER SILESIAN Voivodeship biuro@603805900.pl WROCŁAW BIAŁYSTOK Tomasz Kinal, 697-670-571, tomek.kinal@wp.pl ANFAUS, Piotr Nowik, 692 125 915, pinowik@op.pl ŚRODA ŚLĄSKA IDAR, Arkadiusz Matuszewski, 505-199-422, idar@vip.onet.pl LEGNICA POMERANIAN Voivodeship TOLOS, Tomasz Isbrandt, 604 105 852, isbrandt@wp.pl...
Need help?
Do you have a question about the APOLLO QA018 and is the answer not in the manual?
Questions and answers