Symbols And Conventions; Safety Indication Symbols; Manual Conventions - ABB Relion 650 Series Technical Manual

Section 1
Introduction
650 series manuals
Point list manual, DNP3
Engineering manual
Operation manual
Installation manual
1.4

Symbols and conventions

1.4.1

Safety indication symbols

Although warning hazards are related to personal injury, it is necessary to understand that under
certain operational conditions, operation of damaged equipment may result in degraded process
performance leading to personal injury or death. Therefore, comply fully with all warning and
caution notices.
1.4.2

Manual conventions

Conventions used in IED manuals. A particular convention may not be used in this manual.
• Abbreviations and acronyms in this manual are spelled out in the glossary. The glossary also
contains definitions of important terms.
• Push button navigation in the LHMI menu structure is presented by using the push button
icons, for example:
30
The electrical warning icon indicates the presence of a hazard which could result in
electrical shock.
The warning icon indicates the presence of a hazard which could result in personal
injury.
The caution icon indicates important information or warning related to the
concept discussed in the text. It might indicate the presence of a hazard which
could result in corruption of software or damage to equipment or property.
The information icon alerts the reader of important facts and conditions.
The tip icon indicates advice on, for example, how to design your project or how to
use a certain function.
© Copyright 2011 ABB Power Grids. All rights reserved
1MRK 511 247-UUS B
Identity number
1MRK 511 244-UUS
1MRK 511 245-UUS
1MRK 500 093-UUS
1MRK 514 014-UUS
GUID-2945B229-DAB0-4F15-8A0E-B9CF0C2C7B15 v6
Bay control REC650
Technical manual
AMU0600456 v9