UTEPO SFP-1.25G-20KM-RX Quick Start Manual

SFP Optical Module
1.25G Single Optical Fiber 20km
This is a standard SFP optical module. It uses a single mode optical fiber and the speed rate can up to
1.2 Gbps, transmission distance up to 20 km. This product need to use in pair and match up with 5
converter and optical Ethernet switch with SFP port, it can be used in Ethernet, telecom and optical
communication and other industries...
Feature
Use SFP packaging form, LC connector, support SFF8472 standard;
Support hot plug ;
Transmitter use1310nm FP laser and 1550PIN-TIA;
Receiver use 1550nm FP laser and1310nm PIN-TIA;
The data transmission distance of single mode optical fiber can up to 20 km;
Data input and output ports are comply with the low voltage emitter coupled logic(LVPECL) standard;
Low electromagnetic interference to the environment, strong ESD protection;
Meet IEC-60825 laser safety standard;
Meet RoHS standard.
Board diagram
Installation step
Please check the following items before installation. If any missing, please contact the dealer.
SFP Optical Module,
User manual
Please follow the following step
1) Please turn off the signal source and the device's power, installation with power on may damage
the device;
2) Plug 1.25G single optical fiber 20km SFP optical module into SFP socket;
3) Check if the installation is correct and device is good, make sure all the connection is reliable
and power up the system;
4) Make sure the optical communication is normal.
1
SFP Socket
1.25 S Optical Fiber 20km
G ingle
Optical Fiber Port
1pc
1pc
fiber
fiber