Infatrac Emergency Call Box Quick Start Manual

Emergency Call Box
Quick Start Guide
Rev. A
Issue Date: 06232016
Document Number: 0011
U I
NPACKING NSTRUCTIONS
Your Emergency Call Box (ECB) should contain the
following components:
 Emergency Call Box (ECB)
 7-21vDC barrel plug to terminal block
 Small Elbow Antenna
 USB to Mini USB Programming Cable
 RJ11 Phone Line
The following are sold separately
 AC Power Supply
 Extended Antenna
 Signal Boosters
Figure 1: Rear Panel
Figure 2: Front Panel
(877) 262-6539
S U
ET
1. Connect the Power Plug to the MS130 DC12V
Power Port. Connect the Phone to the Phone Line
Port.(See the Figure 3)
2. Attach the Antenna to the exposed ANT Port.
3. Connect the other end of the Phone and Power
Cables.
Professional Installation Recommended. Basic security
system installation skills are required. If you would like us
to professionally install your MS130, please contact us.
support@infatrac.com
I
P NSTRUCTIONS
Figure 3: MS130 Installation Setup Diagram
www.infatrac.com