Banzai COOL FANS SOUND VIBEZ Instruction Manual

COOL FANS™ SOUND VIBEZ INSTRUCTION MANUAL
Cool Fans™ Sound Vibez is not a toy. Unlike some other Bluetooth® hands free
devices, Cool Fans™ Sound Vibez doesn't came with a microphone for voice
conversation. Never try to use it for that purpose.
To prevent damage or harm to those using this product and surrounding, please
read all safety warnings before use.
PRODUCT SPECIFICATIONS
• Operating Time (approximately):
Low speed
Fans only 5 hours
Bluetooth & Fans 4 hours
• Battery: Built in Li-ion rechargeable batteries 3.7V 2600mAh 9.62Wh
(non-replaceable)
• Input Power: DC 5V 1A (USB charging)
• Charging Time (approximately): 8 hours
• Accessory: USB charging cable
CHARGING COOL FANS™ SOUND VIBEZ
Use the provided USB cable to connect Cool Fans™ Sound Vibez to a power
source such as AC USB adapter, portable charger or computer USB port.
A red light will appear while Cool Fans™ Sound Vibez is charging. Remove the
cable once the light turns off and it is fully charged. Never overcharge the
Cool Fans™ Sound Vibez battery.
The red light will flash when the battery is running low and the battery needs to
be charged.
Medium speed High speed
3.5 hours 2 hours
2.5 hours 1.25 hours 1.5
USING COOL FANS™ SOUND VIBEZ
Place Cool Fans™ Sound Vibez around your neck and turn it on. Turn off the fan
before removing.
USB STATUS
CHARGING PORT INDICATOR
POWER ON
Press and hold the POWER button for 3 seconds. Power on sound and "Pairing"
voice is heard. Blue light near the power button will begin to flash.
BLUETOOTH® SPEAKER PAIRING
Make sure the device such as smart phone, tablet or computer you are using with
Cool Fans™ Sound Vibez has Bluetooth® capability and its Bluetooth® function is
turned on.
Once Cool Fans™ Sound Vibez is turned on, it enters pairing mode and the blue
light flashes.
Look for "Cool Fans" on the Bluetooth® device list and click connect. When
Bluetooth® speaker is connected successfully, the voice "Connected" is heard and
the blue light will change from flashing to a steady non-flashing light.
BLUETOOTH® SPEAKER AUTO CONNECT & DISCOVERABLE
If there is a device previously paired with the fan and its Bluetooth® connectivity is
turned on, the fan will try to connect to the device automatically.
If the previously paired device is not found after 10 seconds, the light will flash red
and blue alternatively. The fan will become discoverable for other Bluetooth®
device to pair.
If Cool Fans™ Sound Vibez does not pair with a device after it has been turned on
for 1 minute, the fan will exit pairing mode and turn off the Bluetooth® function as
well as the red and blue lights. A notification sound will be played to notify you.
If you want to enable Bluetooth® function again, you will need to power off the
Cool Fans™ Sound Vibez and turn the power back on to enable the Bluetooth®
connectivity.
DISABLE CURRENT PAIRING & PAIR WITH A NEW DEVICE
To disconnect Cool Fans™ Sound Vibez from a paired device and pair it with
another device, power off Cool Fans™ Sound Vibez then press and hold the
POWER button for 5 seconds until the alternating red and blue flashing light is
seen. To connect the fan to the new device, repeat the steps mentioned in
BLUETOOTH® speaker PAIRING.
POWER FANS