Advertisement
SHAKE POWDER
SHAKE POWDER
MACHINE
MACHINE
Seismo 11
DTF Powder
Applicator &
MANUAL
MANUAL
User Manual
1. Notice on safety using·······························2
1. Notice on safety using·······························2
2. Installation diagram ··································3
2. Installation diagram ··································3
DRYER
DRYER
A400
A400
USER'S
USER'S
Dryer
dtfstation.com
Advertisement
Table of Contents
Related Manuals for DTF STATION Seismo 11
Summary of Contents for DTF STATION Seismo 11
- Page 1 SHAKE POWDER SHAKE POWDER DRYER DRYER MACHINE MACHINE Seismo 11 A400 A400 DTF Powder Applicator & USER’S USER’S Dryer MANUAL MANUAL User Manual 1. Notice on safety using·······························2 1. Notice on safety using·······························2 2. Installation diagram ··································3 2. Installation diagram ··································3...
- Page 2 6. Temperature Setting ------------ 7. Equipment Maintenance --------- 1. Safety Information Dear Customer, Thank you for purchasing our Seismo 11 Powder Shaker and Applicator! In order to better understand how to properly use your product and avoid damage to yourself or the machine, please read the following safety information.
- Page 3 #1 - Be careful of electric shock. Ensure the machine is well grounded before starting use of machine. Otherwise, bodily injury may occur. #2 - Power supply must match the heater’s. The line must meet the specificiations. #3 - Check whether line is connected well. In particular, the null line must be connected correctly.
- Page 4 3. Installation 4. Operation • Make sure power has been connected (AC 110V, 50/60 HZ). • Confirm that the grounding wire is firmly connected.
- Page 5 • Align the machine and the printer, so that the printer feeds the print into the shaker. • Place the media through the powder machine - refer to the “Media Winding” section below. • Flip the main power switch on the control panel. •...
- Page 6 • Wind the media to the paper tube of the take up winder. Attention: please ensure that the cloth is smooth and there are no folds. The edge of the cloth should be level on both sides of the machine (front & back). 6.
- Page 7 • When the dusting box is not in use for the day, clean the dusting box without powder to prevent the rubber powder from dampening and to prevent powder or motor jamming/burning. In case of powder blockage, the powder spreading blade can be removed for cleaning.
Need help?
Do you have a question about the Seismo 11 and is the answer not in the manual?
Questions and answers