Connections; On Screen Display (Osd); Picture - Eneo VM-FHD22 Installation Manual

Connections

Connect the power cord for your monitor to the DC IN port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate
for your computer. Using the HDMI/DP/VGA connector on the video card.
Connect the signal cable to the HDMI//DP/VGA port of your monitor.

On Screen Display (OSD)

Picture

1. BRIGHTNESS – Adjusts display brightness.
2. CONTRAST – Adjusts display contrast ratio.
3. DCR
• On – This display mode is for Enables DCR.
• Off – This display mode is for Disables DCR.
4. ECO
• Standard – This display mode is for Normal use mode.
EN
7