Please
following
entirely
attempting to use or
assemble the balance beam for the
first
time.
Failure
instructions may lead to injury.
ALWAYS inspect and test the balance beam before use. Do not use if there is damage, wear, or loose parts.
ALWAYS use the beam with controlled movements and balance to avoid injury or damage to surroundings.
ALWAYS protect the balance beam from humidity to maximize service life.
ALWAYS contact the manufacturer or a qualified professional to arrange for proper repair.
ONLY use the balance beam with a padded mat in place below the bar to prevent accidents or injuries.
ONLY use the balance beam for gymnastics training purposes. It is not designed for other uses.
ONLY clean the balance beam with mild soap and a damp cloth if necessary. Use no solvents.
ONLY use this equipment with properly trained, qualified persons under supervised conditions.
NEVER attempt advanced techniques with a balance beam before completing adequate training.
NEVER allow small children on or near the balance beam. It is not a toy.
NEVER continue training if you experience significant pain or discomfort during use to avoid further injury.
NEVER attempt to repair or modify damaged or worn components yourself.
(A)
Balance Beam
(E)
Upper Leg Support
X2
Advanced Balance Beam
read
the
instructions
before
to
follow
PRECAUTIONS
X1
(F)
Lower Leg Support
X2
WARNING:
• This product is for gymnastics use only.
• Do not use a partially-assembled balance beam.
• Not intended for commercial use.
• Do not exceed total weight capacity of 150lbs.
• Do not use balance beam if damaged.
• Perform only on a flat, level surface.
PARTS
(B)
(C)
Leg Bars
X2
(G)
(H)
Hex Wrench
Base Bar Retention Bolts
X1
Milliard Brands © 2018 All Rights Reserved.
(D)
Rubber Feet
X4
(I)
Bolt Washers
X16
X2
X16 each
Need help?
Do you have a question about the Advanced Balance Beam and is the answer not in the manual?
Questions and answers