Page 3
• Components should only be retrofitted after consulta- tion with the manufacturer. www.em-technik.com EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany info@em-technik.com...
Page 4
2 Manufacturer’s Specification article no. 2.1 Description The 4Z series of flow meters offer a wide range of con- 4Z100G0318... 1/8“ ~104 nection options - rear, side and top or bottom. Special and standard measuring tubes are used, which are indi- 4Z200G0318...
Page 5
The tools required for installation and assembly are not • Parallax-free reading: Look over the top edge of the included with delivery. float and read the measured value on the scale. www.em-technik.com EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany info@em-technik.com...
Page 6
In case of questions or suggestions please contact us: be included. EM-Technik GmbH Industriestr. 2 +49 6237 407-0 67133 Maxdorf Fax +49 6237 407-77 Germany info@em-technik.com www.em-technik.com EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany info@em-technik.com...
Need help?
Do you have a question about the 4Z Series and is the answer not in the manual?
Questions and answers