Advertisement
15. KEYPAD ILLUMINATION BY PROXIMITY
#Master Code
●
55
by proximity ON)
#Master Code
●
55
by proximity OFF – factory default setting)
Result: Entire keypad will light up when touched
by card/hand etc.
Note: Power consumption is increased when in
this mode.
16. KEYPAD ILLUMINATION BY BUTTON
PRESS
#Master Code
●
56
by button press ON)
#Master Code
●
56
by button press OFF – factory default setting)
Result: Entire keypad will light-up on press
of first button.
Note: power consumption increased
when in this mode.
17. CANCEL EMERGENCY OPEN VIA REM 2
#Master Code
●
57
Result: If lock REM 2 port has been used and
active for emergency opening of lock, this
program will cancel emergency open and put
lock back into lock status before REM2 port
was activated.
B) MANAGE LOCK
WITH SMARTPHONE
The KIC Smartlocks can be managed via the
K3 Connect App when downloaded onto
a Bluetooth compatible phone or device:
•
iphone 4S or above with iOS 9.0 or above
•
Android 5.0 or above with Bluetooth
Low Energy capability.
Note: Please make sure Bluetooth
connectivity on phone/device is turned ON.
•
Step 1 – Download the
your device or phone from the Apple App store
or Google play.
•
Step 2 – Once installed open
4
●
1
●●
(Keypad illumination
●
0
●●
(Keypad illumination
●
1
●●
(Keypad illumination
●
0
●●
(Keypad illumination
●●
K3 Connect App onto
K3 Connect App.
•
Step 3 – Select "Create Account" and using
email sign in.
•
Step 4 – To add lock or any additional locks
touch the + icon on the LOCKS screen of the
K3 Connect App.
•
Step 5 – Enter the lock DIN (Description and
Identification Number) and choose a lock name.
IMPORTANT
The Locks DIN is specific to lock
type installed as follows:
KIC4510 DIN = KIC4510
KIC5510 DIN = KIC5510
KIC6510 DIN = KIC6510
Please note the DIN is case sensitive. The lock
name can be anything e.g. Workshop, Front
Door, Room 26, Dr Surgery etc.
•
Step 6 – Now pair the phone or device (within
3 feet) with the lock by pressing the tick mark on
the App and then immediately on the lock enter
the following Keypad program 2:
#Master Code
●
11
●●
The lock will automatically pair with the phone
and is now ready to use.
USING THE APP
The
K3 Connect App allows the
lock owner to manage multiple locks
via a compatible phone when set up
as Administrator. The App and UI (User
Interface) for the App are updated and
improved on a regular basis, please ensure
updates are downloaded to ensure optimum
performance and ease of use.
Using the App the administrator can perform all
the programming tasks as shown previously via
the keypad, but is also able to utilise additional
programs and features such as:
•
Set names for locks.
•
Add/delete/suspend/restore All clients –
Phones – Cards – Codes.
•
Set locks parameters eg Daylight saving,
Re-lock delay etc.
•
Set Client name/reference.
Advertisement
