Monte Carlo Fan Company ESSWC-6-WH Installation And Operation Instruction

ESSWC-6-WH
CEILING FAN Wall CONTROLLER
INSTALLATION AND OPERATION INSTRUCTION

SAFETY INFORMATION AND GENERAL GUIDE

READ AND SAVE THESE INSTRUCTIONS
• Please read and understand this entire manual before attempting to assemble, install or operate
the product.
• Make sure that all electrical connections comply with local codes, ordinances, the National
Electrical Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself
wiring handbook if you are unfamiliar with installing electrical wiring.
• Warning: Before proceeding, be sure to shut off electricity at main switch or circuit breaker in
order to avoid electrical shock.
Make sure the fan is set on HIGH speed and the light is in the ON position by pull chain
controls originally supplied with your fan.
Note: Fan installation must be complete including assembly of blades before testing wall control
unit.
Note: Refer to your Ceiling fan instruction manual for Safety and installation instruction.
This wall controller is to be used for the control of ceiling fan and fan light only, and in an
AC 120V 60HZ power supply only.
Warning: Do not exceed maximum rating of the wall controller. Install the wall controller
away from excess heat or humidity
Do not use the wall controller with SOLID-STATE fans.
Customer Service
800-969-3347
Customer Service Center
7400 Linder Ave.
Skokie, IL 60077
www.montecarlofans.com