Page 2
Use only a dry cloth to clean the iK500. Only use the iK500 in areas with adequate open ventilation allowing at least 4” 3rd Generation iPod of space on all sides of the iK500. Do not set the iK500 on any surface or cover the iK500 with any object that could 30GB, 40GB impede the airflow to and from the iK500 Stereo System.
Page 3
Figure 4 After plugging the power supply into the DC input on the back of the iK500, the unit will be in “Standby” mode, as displayed by the LCD screen on the System Menu. Turn the power on by pushing the rotary control button once.
Page 4
Auxiliary Mode If you are trying to playback audio from an auxiliary device, make sure that Aux-In mode is enabled and the device is connected to the 1/8” stereo input on the back of the iK500. If you are trying to playback audio from a docked iPod, make sure that Aux-In mode is disabled.
Need help?
Do you have a question about the iKICK iK500 and is the answer not in the manual?
Questions and answers