Before First Use - AEG TR938H2C User Manual

6.6 Signál
The acoustic signal sounds at the
following:
• cycle end
• start and end of crease guard phase
The acoustic signal is by default always
on. You can use this option to activate or
deactivate the sound.
Signál option off:
1. Turn the dryer on.
2. Select 1 of the available programs.
3. Touch and hold down Osvěžení
button by around 3 seconds.
The symbol
4. To activate the Signál, touch the
above button again until the symbol
disappears.
6.7 Konec za
This option allows choosing
the time at which a
programme should
terminate. Once activated
the machine waits for the
right moment to begin the
drying process.

7. BEFORE FIRST USE

Rear drum locks are
removed automatically when
dryer is activated for the first
time. Possible to hear some
noise.
To unlock the rear drum locks:
1. Switch on the appliance.
2. Set any programme.
3. Press the Start/Pause button.
Drum starts to rotate. Rear drum locks
are automatically deactivated.
Before you use the appliance to dry
items:
appears on the display.
Konec za time is the sum of stand by
time and drying time.
To set the Konec za option:
1. Set the drying programme and
options.
2. Touch Konec za repeatedly until the
display shows the desired time within
the programme should end (e.g.
if the programme has to finish
within 12 hours.)
3. Touch the Start/Pauza button. The
drum starts rotating to perform the
ProSense estimation, if foreseen in
the selected programme.
4. The appliance starts the countdown
to the end of the programme and the
programme will start at the right
moment for ending.
• Clean the tumble dryer drum with a
moist cloth.
• Start a 1 hour programme with moist
laundry.
At the beginning of the
drying cycle (first 3-5 min)
there could be a slightly
higher sound level. This is
due to the compressor
starting up. This is normal
for compressor powered
appliances such as
refrigerators and freezers.
ENGLISH 15