Summary of Contents for c-trace c-ident HT11
- Page 1 Instruction manual c-ident handheld terminal HT11 Instruction Manual c-ident – Handheld Terminal HT11...
-
Page 2: Table Of Contents
Allocation with Additional Information (Verheiraten mit Info) ......8 Emptying (Leeren) ..................8 Emptying with Additional Information (Leeren mit Info) ......... 9 Display Bookings ..................9 Data Takeover ..................10 Technical Data ....................11 c-trace 05.08.2015, Version 2 page 2 / 11... -
Page 3: Introduction
The device has an internal backup battery for operation of the real-time clock and the GPS reception. This can bridge a period of about 8h. It will be required if the operation batteries are removed from the device or they are totally discharged. c-trace 05.08.2015, Version 2 page 3 / 11... -
Page 4: Driver Software
Run as administrator. If you do not have permission to install the driver, an error message appears. In this case, please contact your administrator. Connect the HT11 to your computer with the supplied USB cable. The device driver software will be installed. c-trace 05.08.2015, Version 2 page 4 / 11... -
Page 5: Configuration
The connection is made to the HT11 by clicking the button Connect. It changes to Connected when the connection process is completed. The handheld indicates success with the message online on the display. c-trace 05.08.2015, Version 2 page 5 / 11... - Page 6 Set timeout: Determines how long the handheld will search for a chip. Set FDX code: Chip numbers can be displayed in different codes in compliance with ISO 11784/11785. Please select 1 – Hexadecimal. c-trace 05.08.2015, Version 2 page 6 / 11...
-
Page 7: Adding Additional Information With The Databoy Tool
Adding Additional Information with the Databoy Tool If you want to add additional information to an emptying or allocation dataset, this must be defined prior to operation. The additional information is stored in a simple Excel csv- file. c-trace 05.08.2015, Version 2 page 7 / 11... -
Page 8: Operation
In the emptying mode, only one ID is selected, i.e. either the barcode or the chip. This ID along with a time stamp and a GPS coordinate, if available, is stored in the internal memory of the HT11. c-trace 05.08.2015, Version 2 page 8 / 11... -
Page 9: Emptying With Additional Information (Leeren Mit Info)
The time stamp The additional information (if any) The GPS coordinates (if available) Use the F1 and F2 keys to scroll down the list of saved entries. Pressing the F3 key exits the mode. c-trace 05.08.2015, Version 2 page 9 / 11... -
Page 10: Data Takeover
HT11, press the button Erase records. The created file can be opened in Excel format by clicking on the file with the right mouse button and select Open with Excel. c-trace 05.08.2015, Version 2 page 10 / 11... -
Page 11: Technical Data
Read/Write: Q5, Hitag-1, Hitag-S 256 / 2048, Tiris Barcodes Barcodes 1D UPC/EAN (EAN-13), Code 128 (UCC/EAN-128), Code 39, Trioptic Code 39, Code 39, Interleaved 2 of 5, Discrete 2 of 5, Codabar, MSI Plessey c-trace 05.08.2015, Version 2 page 11 / 11...