Page 2
TA BL E OF C ON T EN TS GLOW RINGS BOX CONTENTS ASSEMBLING YOUR GLOW RINGS WHEN TO GET GLOWING...
Page 3
GLOW RING S INDIVIDUA L BOX C ON T EN TS 2 RING BOX 3 RING BOX 4 RING BOX 5 RING BOX 6 RING BOX UAL-CABLED" LIGHT RING "DUAL-CABLED" LIGHT RING POWER SUPPLY POWER SUPPLY "DUAL-CABLED" LIGHT RING POWER SUPPLY Dual-Cabled Glow Ring TOP "SINGLE-CABLED"...
Page 4
A S SEMBL ING YOUR GLOW RING S If you already have a Farmstand, begin by unplugging your Farmstand, removing the lid, diffuser cap, fill port cap, gasket, and all modules except for the first one. If you are setting up a new Power Supply Farmstand follow the Farmstand Assembly guide and add just one module.
Page 5
Get your next module level ready and feed the longer, non-connected Glow Ring cable up and through the center hole before you attach the second module to the first Glow Ring. Hint: It’s easier to feed the cable through the module center before locking the module in place.
Page 6
A S SEMBL ING YOUR GLOW RING S Diffuser The small pipe extender and coupler (received in Glow Ring™ the Glow Rings box) should be placed at the top of Pipe Extension the pipe stack, closest to the diffuser. Note: Pipe Pipe Coupler extensions and couplers are only needed for 24-, 30- and 36-plant Farmstands.
Page 7
WHEN TO GE T GLOWING Night You will have two timers: one for your Glow Rings and one for your water pump. The watering cycle will be different when the Glow Rings are on than when they are off so it’s important to make sure the timers are synced to the same time.
Need help?
Do you have a question about the GROW RINGS and is the answer not in the manual?
Questions and answers