Key Digital KD-PC1 Specification Sheet

KD-PC1
KD-PC1 is a Digital Video Plug-in Card
& Video Processor for Pioneer Model's
CMX 425, 434, 504, 505, 507 , 607 .
General:
Pioneer Plasma video card and processor
›
Specifically engineered for operation in Pioneer Plasma
›
Display models:
PDP-504, 505, 507, 607CMX: Native 1280x768 WXGA
➔
PDP-425, 434CMX: Native 1024x768 XGA
➔
All internal connections from the KD-PC1 card to the Pioneer
›
Plasma Display via the Pioneer Plasma ES (Expansion
Solutions) card slot.
Four (4) HDMI Inputs:
›
Select any HDMI digital input (or any analog video input)
➔
To support DVI-D Video I/O, use Key Digital
»
HDMI<>DVI adapter cable(s)
Supports EDID and HDMI plug-and-play capability
»
Supports HDCP Copy Protection
➔
Individual Analog Video Inputs supported:
›
Select any analog video input (or any HDMI digital input)
➔
Separate analog video connectors for RGB(HV), S-Video,
➔
Component Video (YPbPr), Composite Video (CV)
NTSC and PAL
➔
Audio In and Out with individual connectors for:
›
Analog audio left and right stereo pair and SPDIF digital
➔
audio
Process and scale any HDMI digital video or any analog
›
input to match the native resolution of your Pioneer Plasma
Display:
Using world-renowned Key Digital Clear Matrix Pro
™
➔
technology
A full-function, high-quality Video Processor is included
➔
Supports all popular source formats and resolutions
➔
Easy to control and operate:
›
Easy-to-operate IR Remote Control
➔
RS-232 control via the Pioneer Plasma Display
➔
Does not interfere with the operation of your Pioneer
➔
Plasma Display
Does not interfere with A/V sources connected directly to
➔
your Pioneer Plasma Display
Key Digital Exclusive Technologies
®
521 East 3rd Street, Mount Vernon, NY 10553
:: ::
Phone 914.667.9700 Fax 914.668.8666
::
Web www.keydigital.com

Video Inputs:

HDMI Digital Video (HDMI is plug-and-play and also
›
supports audio):
Four (4) separate Input connectors, labeled "HDMI 1"
➔
through "HDMI 4"
To support DVI-D Video, use Key Digital® HDMI<>DVI
»
adapter cable(s)
Supports HDCP Copy Protection
➔
Analog Video (individual analog video connectors for each of
›
the following video interfaces):
RGB(HV)
➔
Component Video (YPbPr)
™
➔
S-Video: NTSC, PAL
➔
Composite Video (CV): NTSC, PAL
➔

Audio Inputs and Outputs:

Analog audio left and right stereo pair input and output
›
SPDIF digital audio input and output
›
Video Input Formats Supported:
Supports the following popular video Input Formats:
›
720 x 480i @ 60 Hz
➔
1280 x 720p @ 60 Hz
➔
Accepts and automatically detects 60 Hz and 50 Hz input
›
formats (the output frame rate will be the same as the input
frame rate), and PAL analog on the S-Video and Composite
Video inputs
™

Video Processing Functions:

Edge Enhancement, Brightness, Contrast
›
Saturation, Tint
›
Individual display Calibrations for RGB Gain and Setup
›
H & V Size, H & V Position
›
Zoom (Output Aspect Ratio processing), including options to
›
prevent monitor burn-in for Letterbox or Pillarbox images:
Normal
➔
Vertical Zoom In/Out Horizontal Zoom In/Out
➔
Horizontal and Vertical Zoom In/Out
➔
Built-in Test Patterns help you set-up your video system (all
›
patterns available through the OSD from the IR Remote, as
well as RS-232):
White screenColor bars
➔
Specification Sheet
➔
➔
➔
Stores your custom settings for each HDMI and analog video
›
input
Easy-to-operate IR Remote Control
›
RS-232 control via the Pioneer Plasma Display:
›
Compatible with Crestron, AMX, Elan, Control4, Xantech
›
Firmware-upgradeable directly through the KD-PC1 15-pin
›
VGA connector:
➔
Built-in Test Patterns available through the IR Remote
›
Control, as well as RS-232
Connectors:
HDMI Digital Video (also supports audio):
›
➔
Analog Video:
›
➔
➔
720 x 480p @ 60 Hz
➔
➔
1920 x 1080i @ 60 Hz
➔
➔
Audio:
›
➔
➔
RS-232C: D-sub 9-pin on the Pioneer Plasma Display
›

Included Accessories :

Two (2) Audio cables
›
One (1) special Firmware Upgrade cable
›
IR Remote Control with batteries
›
Mechanical:
Product size: 11.2" x 8.6" x 1.0", fits in the ES (Expansion
›
Solutions) Slot of the Pioneer Plasma Display
HD Xplorer
Gray scaleHorizontal wide ramp
Vertical wide ramp
Status and Control:
The Firmware Upgrade cable provided with the KD-PC1
must be used
4 x HDMI Type A 19-pin connector
RGB(HV): mini D-sub 15-pin connector
Component Video (YPbPr): 3 x color-coded RCA female
connectors
S-Video: 1 x S-Video connector
Composite Video (CV): 1 x RCA female connector
Analog stereo Left & Right Audio:
1 x stereo mini jack input
»
1 x stereo mini jack output
»
SPDIF digital audio:
1 x RCA female connector input
»
1 x RCA female connector output
»
Supported Technologies
™