Advertisement
5
Operation and Maintenance Guide
This set of RBW 5500 Series 5
and minimal maintenance. Please follow the operating guidelines to insure the best
possible performance and ask your authorized dealer for a demonstration.
Extending your Landing Gear
1. Always lower the quick drop legs first. This bottom leg can be lowered in 1" or 1 ½
" intervals up to a total length of 15 inches. Be certain that the leg is fully secured
in place and on a safe foundation before you begin lifting the RV.
2. When both quick drop legs are as close as possible to a safe foundation, begin
lifting by activating both landing gear motor with the toggle switch identified on
the RV. Do not extend the powered inner leg more than 18 inches.
Never unhitch and allow the 5
ground. This will cause damage not covered by the warranty.
Extending your Landing Gear Manually
th
1. Your 5
Wheel Landing Gear may be operated manually in the event that
insufficient electrical power is available. Start by locating the jack handle. Insert
the jack handle into the override access located on the powered side of your
landing gear.
2. Use the jack handle to extend the landing gear.
3. See your authorized dealer for a demonstration.
TH
Wheel Landing Gear
5500 Series
th
Wheel Landing Gear was designed for long life
-
th
wheel trailer to drop to the
LG-02-55-0302
Advertisement
