JACFIT JMATE User Manual

JMate
USB charging cable
JMate strap x 2 (260mm/290mm)
Charging
1. Attach the small end of the USB cable to the
magnetic charging port on your device.
2. Plug the large end of the USB cable into a
USB charging port.
3. LED indicator will light up "Red" until
charging is completed. Note: When indicator
flashes "Green" means battery is low.
Please charge.
Installation
1. Align JMate and
strap with Jacfit
logo.
2. Connect them with
hook magic tape.
Scan QR code to download the
Jacfit App
iOS Android
More info on the website,
Jacfit.com
JMate Boxing Mode
1. Knock JMate and check
the indicator light. Wear
it on your "Right wrist"
and the indicator light
side facing you.
2. Turn on Location and Bluetooth on mobile setting. Allow Jacfit
app to use them while first download. ①
3. Open the Jacfit app and enter "Boxing" mode. ②
"Jacfit" Would Like to
Use Bluetooth
①
Jacfit requries to use Bluetooth to
connect with the device
Don't Allow OK
4. Knock JMate to wake up. When
the LED indicator lights up
"Green", you will see the sensor
ID appears on the Bluetooth
setting.
5. Click the ID and press "Connect"
to Boxing mode. If connected,
the indicator light will become
"Blue".
Boxing
Bike Run
②
Bluetooth Setting
Device list
JMate
Connect
Skip