Download Print this page

Collomix AQIX Quick Start Manual

Hide thumbs Also See for AQIX:

Table of Contents

Need help?

Do you have a question about the AQIX and is the answer not in the manual?

Page 2: Control Elements
The water dosing system may only be used with clear freshwater at a water temperature of up to 40°C. The Collomix AQiX water dosing system is not designed for Control elements industrial use. It is not permi琀琀ed to use the meter with salt water, chem- Display icals, foodstu昀昀s, spirits, highly 昀氀ammable and explosive...
Page 3 Start dosing: Assembly/commissioning Press the "START/PAUSE” (12) bu琀琀on to start the metering. The AQiX water dosing system is set to the unit of “litres” You can interrupt the metering process. Press the "START/ ex works. PAUSE” bu琀琀on to do this. Pressing the bu琀琀on again starts The device is delivered with a standard ½“...
Page 4: Electric Power Supply
Please return the device to us if you detect any irregu- larities. Complaints/claims can only be considered if the device is delivered to the Collomix Service department in a complete and undismantled state. Moun琀椀ng on a mixer drum Manual opera琀椀on...
Page 5: Care And Maintenance
Care and maintenance Clean equipment: Keep the device clean and remove any dirt immediately. Clean the device with a damp cloth and a mild cleaning detergent (soap). Do not use any cleaning agents containing solvents. Changing the ba琀琀eries: To change the ba琀琀eries, open the ba琀琀ery compartment (3) cover using a screwdriver. Remove the old ba琀琀eries.