Summary of Contents for Icotera i46 Series
- Page 1 User Guide for Icotera i46xx, i68xx, and i485x series Published: June 2021 Firmware version: 1.17.3 Document version: 1.0 Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0...
-
Page 2: Change Log
User Guide for 1.17.3 Firmware Change log Date Version Reason for a change Author 10.06.2021 First official release. support@icotera.com Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0... -
Page 3: Product Overview
User Guide for 1.17.3 Firmware Product Overview This chapter provides a general overview of the Icotera i46xx, i68xx, and i485x CPEs, their components, features and characteristics. For more detailed specifications please refer to their data sheets. Physical Description This section describes the physical components of the CPEs, i.e. connectors, LEDs, and buttons. - Page 4 User Guide for 1.17.3 Firmware Figure 3. Status LEDs Please note that the LEDs setup depends on the actual model of the Icotera device. The following table shows the status LEDs descriptions. Table 1. The status LEDs descriptions LED type...
-
Page 5: Power Port
10 Mb/s, 100 Mb/s or 1000 Mb/s Ethernet segments or nodes. USB Ports The Icotera CPE is equipped with one USB 3.0 and one USB 2.0 port that supply 5 V at 500 mA. POTS Ports The Icotera CPE uses FXS RJ-11 (2-pin modular) port connectors for POTS (VoIP) connections. -
Page 6: Logging Into The Web Interface
User Guide for 1.17.3 Firmware Configuring and managing the CPE This chapter provides a comprehensive overview of the Icotera CPE configuration and management features. It focuses on managing the device using the web interface, as this interface is the only method of device management available to the end user. - Page 7 User Guide for 1.17.3 Firmware Top bar The top bar contains the Icotera logo, device designation, drop-down list which enables to choose interface language, and the Log out button. Menu The menu has a form of a collapsible list of available options, which are grouped into two levels: main and secondary.
-
Page 8: Viewing Status Information
Wi-Fi 802.11b/g/n: The status of the Wi-Fi 802.11b/g/n wireless interface, either On or Off, • • Wi-Fi 802.11ac: The status of the Wi-Fi 802.11ac wireless interface, either On or Off. Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0... -
Page 9: Wan Information
• • Subnet mask: subnet mask used by the WAN interface, • Default gateway: default gateway configured for the WAN interface, MAC address: interface’s physical address, • Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0... -
Page 10: Lan Information
Status: current status of a given interface, either Up or Down, • • Pkts in: number of incoming packets, Pkts out: number of outgoing packets, • Errors: transmission error counter, • • Collisions: collision counter, Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0... - Page 11 Pkts out: number of outgoing packets, Bytes in: number of incoming bytes, • Bytes out: number of outgoing bytes, • • Errors: transmission error counter, Collisions: collision counter. • Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0...
- Page 12 The wireless interface information section can be refreshed at any time with the Refresh button. As this section does not include any configurable options, the Reset, Save, and Apply buttons are disabled. Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0...
- Page 13 Please note that the CATV menu section is available only in devices with present CATV mod- ule. Other figures in this guide depict Web UI of a device without CATV feature. Figure 13. CATV item of the Status menu Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0...
- Page 14 MAC Address: MAC address of a connected device, Mode: mode of operation, • Band: frequency band used by the client (2G indicates connection with 2.4GHz radio and 5G connection with • 5GHz), Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0...
-
Page 15: Lan Settings
Gateway (only for dynamic IP configuration): specifies IP address of your network gateway, • Primary DNS (only for dynamic IP configuration): specifies primary Domain Name System server to be used to resolve DNS queries, Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0... - Page 16 2.4GHz: redirects dual-band clients to 2.4 GHz, force 5GHz: redirects dual-band clients to 5 GHz, prefer 2.4GHz: redirects dual-band clients to 2.4 GHz, unless they persist, Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0...
- Page 17 Wi-Fi interface). Please note that None leaves the wireless AP unsecured and open for access from any Wi-Fi device. The recommended encryption type is WPA2 AES. Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0...
- Page 18 The Download file section allows to save current configuration to a local drive: • Click to download config: press Save button to generate and save file with the current CPE configuration. Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0...
-
Page 19: Using Network Diagnostic Tools
Packet size: data size in bytes, Packet count: number of packets to be sent. Ping: starts sending ping packets to the specified address, • • Stop: interrupts ping command, Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0... - Page 20 Figure 21. Wi-Fi scan tool of the Diagnostic menu • Scan: starts site survey process, • Site survey: information about detected networks: CH: operating channel number of a network, Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0...
-
Page 21: Configuring Administrator Settings
The UI login password item of the Administration menu allows to change user’s password by filling out the following fields: Old password, • • New password, Retype new password. • Figure 25. Changing password in the Administration menu Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0... -
Page 22: Managing Remote Access
Port forwarding rules can be configured under the Port forwarding item of the Services menu. By default all rules are disabled and inactive. In order to fill the fields of a chosen rule first mark its checkbox. Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0... - Page 23 Demilitarized zone can be configured under the DMZ item of the Services menu. Figure 29. DMZ item of the Services menu • Enable: activates or deactivates DMZ, DMZ destination IP: IP address of the DMZ destination, • Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0...
-
Page 24: Parental Control
Figure 30. ALG item of the Services menu Parental control Parental control settings can be configured under the Parental control item of the Services menu. Figure 31. Parental control item of the Services menu Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0... - Page 25 As this tab does not include any configurable options, the Reset, Save, and Apply buttons are disabled. DDNS The DDNS feature allows to manage Dynamic DNS feature. Figure 33. DDNS item of the Services menu with help displayed Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0...
- Page 26 Figure 34. UPnP item of the Services menu NAT type NAT type masquerade can be selected under the NAT type item of the Services menu: Figure 35. NAT type item of the Services menu Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0...
-
Page 27: Ipv6 Firewall
Destination ports: single destination port or range of ports, • Source IPv6: source IPv6 address, Destination IPv6: destination IPv6 address, • Enabled: - enables or disables chosen exception. • Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - info@icotera.com Document version: 1.0... - Page 28 User Guide for 1.17.3 Firmware The information contained in this document represents the current view of Icotera on the issues discussed as of the date of publication. Because Icotera must respond to changing market conditions, it should not be interpreted to be a commitment on the part of Icotera, and Icotera cannot guarantee the accuracy of any information presented after the date of publication.
Need help?
Do you have a question about the i46 Series and is the answer not in the manual?
Questions and answers
are you real time
@David Simpson
The Icotera i46 Series provides real-time statistical data on interface status, packet counts, errors, collisions, and speed, and allows refreshing this information at any time. This indicates it is capable of real-time performance monitoring.
This answer is automatically generated