Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for LUBE BIOLUBE 1000 Series
- Page 1 Operating Instructions LUBE MASTER SPRAY SYSTEM 1000 Series...
-
Page 2: Operation
Operation: The function of the Lubie sprayer is to apply a small amount of lubricant/coolant through atomizing nozzles onto the cutting tool. The high-pressure air drives the lubricant/coolant onto the tooling. The higher the speed of the tooling the higher the air pressure you will use. Band saws generally use 20-60 psi, moulders, finger jointers and circle saws 90-120 psi. - Page 3 Two nozzles above the guide and two nozzles on the inside back. Sometimes a narrow band has pitch problems on the outside and the Lube Master can help. Direct the outside nozzle to the band just before it enters the cut. Outside nozzles should only be installed at the guide just before the blade goes into the wood.
- Page 4 Nozzle Mounting: 12” Band Saw with 2 nozzles mounted just above guide, 2 additional nozzles go on the inside of the saw. Any place that is easy to attach the nozzles on the inside back is OK. The objective is to coat the blade before it reaches the top wheel.
- Page 5 Now that the nozzle mounting is done, fill the tank with lube and attach your airline to the air pressure regulator. Turn on the air and set the air pressure regulator for the saw or tooling you are using. See the pressure settings below. Next set the lubricant flow by turning the black knob on the top of the clear sight dome.
-
Page 6: Cold Weather Operation
Wait for a minute or two and let the air pressure blow all the lube out of the lines. Then turn off your air line ball valve or on the air pressure regulator turn off the air. In the morning simply turn on the air and readjust the lube drip rate. - Page 7 4611 NEWAYGO ROAD, SUITE D, FORT WAYNE INDIANA 46808 PH:260-414-9633 EMAIL: sales@bioube1.com www.biolube1.com...
- Page 8 WARNING: FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY, AND PROPERTY DAMAGE. It is important to analyze all aspects of the applications, including consequences of any failure and review the information concerning the product or system in the current product catalog.
- Page 9 WARNING To avoid unpredictable system behavior that can cause personal injury and property damage. • Disconnect air supply and depressurize all airlines connected to this product before installation, servicing, or conversion. • Operate within the manufacturer’s specified pressure, temperature and other conditions listed in these instructions.
- Page 10 Lubie Lubes ® Lubie Lubes are formulated for specific uses to meet your particular needs. No silicones or waxes are used in any of our products and most are free of toxic or hazardous chemicals and are biodegradable. Lubricants are available for both saw and moulder bed applications.
Need help?
Do you have a question about the BIOLUBE 1000 Series and is the answer not in the manual?
Questions and answers