CAMDEN CV-TXM2 User Manual page 2

Two button transmitter

Hide thumbs

page of 2

/ 2
Bookmarks

HOW TO CHANGE THE BATTERY

Loosen the screws and open the remote control.

Fit a new battery taking care of aligning polarity correctly.

During the operation, handle the battery as shown in Fig.1.

For Property Managers Only:

Refer to doc #40-82B262 Manual

for enrolling transmitters

Opening New Doors to

Innovation, Quality and Support!

HOW TO CHANGE THE BATTERY

Loosen the screws and open the remote control.

Fit a new battery taking care of aligning polarity correctly.

During the operation, handle the battery as shown in Fig.1.

For Property Managers Only:

Refer to doc #40-82B262 Manual

for enrolling transmitters

Opening New Doors to

Innovation, Quality and Support!

Warning for replacing the battery

•

Do not invert battery polarity

•

Use batteries of the same type and size as the original ones

•

Do not recharge the battery

•

Use specific bins for disposing of the used battery

This device complies with part 15 of the FCC Rules. Operation

is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including

interference that may cause undesired operation.

Note: The grantee is not responsible for any changes or

modifications not expressly approved by the party responsible

for compliance.

Such modifications could void the user's authority to operate

the equipment.

Call: 1.877.226.3369 / 905.366.3377

Visit: www.camdencontrols.com