Technical Data - BorMann Elite BVC4300 Quick Start Manual

EN

Technical Data

Voltage:
Input power:
Boiler capacity:
Water tank capacity:
Steam pressure:
Power cable length:
Operating instructions
Preface
Because the high temperature steam flows out of the rubber tube, there will be a rubber smell during use. The smell has no effect on the body. However, since
water vapor fills the space, please do not use it in a closed room. Infants and pets should be transferred to other rooms before use. The smell of rubber will
disappear after repeated use.
Caveat
Please do not use materials that are not heat-resistant, wood products that are afraid of water and heat, etc.
Before use, please read carefully the "Precautions".
Uncertain materials can be used after testing on unimportant parts.
Basic usage and key points description
Note:
Do not plug in the power supply before the following operation sequence 6.
Don't work without water and electricity.
Warning
Never point the nozzle at people during use!
Note
Every time at the beginning of use and if there is no steam injection for a long time, a small amount of steam condensed water will be sprayed out of the pipe-
line. It needs to be sprayed on the dirt or on the towel as appropriate.
When you stop cleaning, you must push the safety lock on the handle to the ON position to prevent accidental ejection and cause danger.
The refill indicator will flash when there is no water in the water tank. If you need to continue using it, please add water as described in the chapter (Adding
water).
Note
If there is no water in the water tank, please add water immediately or stop using it, turn off the power switch (OFF position) and pull out the power plug. Please
do not continue to use it with power, it may cause malfunctions.
4
230V
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless
2000W
these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual
that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be
1.5Lt
included in the product you just acquired.
0.9Lt
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be
voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
4Bar
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including
maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
3m
1. Pour clean water into the water tank, or lift the water tank separately to fill it with water and then put it back
on the body.
2. Open the socket cover at the front of the body and insert the hose into the body
3. Check whether the pressure relief valve is tightened and whether the water tank is in place.
4. Put the safety lock on the handle to the ON position,
How to use the safety lock
In order to prevent accidental steam injection, a safety lock is provided on the handle. When the safety lock is
locked in the ON position, the steam cannot be released, and the steam switch can be pressed to release the
steam in the OFF position.
- When not in use, make sure that the safety lock is pushed to the ON position. To prevent accidental steam
injection causing danger!
5. Connect accessories or extension tubes to the handle according to the purpose
Please read the follow-up instructions for the installation and use of the accessory nozzle and extension tube
Note
It is dangerous to use only the handle and must be used in combination with the nozzle or extension tube.
6. The plug is inserted into the power socket, and the power switch is set to ON and the indicator light is on
(red). The machine is energized and heated
About 3 minutes, the use indicator lights up (green)
7. Wait until the use indicator light is on (green), indicating that the machine has reached the highest tempera-
ture, push the safety lock to the OFF position
8. Aim the nozzle at the stained place and press the steam switch.
Please adjust the use interval reasonably according to the condition of the stain.
WWW.BORMANNTOOLS.COM