Advertisement
Remote control
The remote requires a line-of-sight path to allow for the signal to be
received by the unit. Position the unit so the receiver lens is visible from
the remote control.
The symbols on the remote correspond to the symbols on the main unit.
Ensure batteries are inserted in the correct direction. Do not mix battery
types. When replacing, ensure both batteries are changed simultaneously.
2 x AAA size batteries are required.
The fan requires regular cleaning to ensure trouble free operation.
Ensure that the fan is switched off from the supply mains before removing the guard.
Unplug the fan from the mains supply before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the fan to remove dust and dirt.
Use a vacuum cleaner to remove dust and fluff from around the grills.
Ensure the fan is dry before plugging back into the mains supply.
Do not attempt to dismantle the fan. There are no user serviceable parts. For service
or repair, contact an authorised electrical service technician.
Proof of purchase
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
Operating your Fan
Cleaning
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@cdb.co.nz
SUPPORT AND TECHNICAL ADVICE
Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
info@cdbgoldair.com.au
Advertisement
